Buffalo Technology WHR-G54S-QSG setup guide Configure Wireless SettingsAOSS

Step 3: Configure Wireless SettingsAOSS

AOSS (AirStation One-Touch Secure System) is a simple system for configuring your wireless network securely. If your router and your client device are installed and both support AOSS, then making a secure wireless connection between them is very easy. If your client device doesn’t support AOSS, or you want to configure your wireless network manually, turn to page 5.

A. Hold down the AOSS button on the top of your AirStation for a few seconds. The AOSS light will begin to flash amber.

B. You now have two minutes to push the AOSS button on your client device and finish the connection.

If you have a standalone client device, it will
probably have a little red button labeled
“AOSS” on it. Push the button!
If your client device is a PC card, CardBus, or
PCI adaptor, the AOSS button will probably
be in its Client Manager Software. Check your
client device’s user manual for instructions on
where to push or click the AOSS button.
	standalone	PC card	Client Manager
After you’ve pressed both buttons, it will
	client device		Software
take about 15 seconds for the connection to
complete. When it’s finished, the AOSS light

will glow a solid amber. You now have a secure network connection!

Note: Only one AOSS wireless client adapter can be configured with the AOSS router at a time. The buttons will need to be re-pressed to connect each additional AOSS wireless client adapter.

To connect non-AOSS devices to your AOSS network, you can get the necessary network information from the System Information page in the AirStation Configuration Utility.

4