Power Boosters

USB Power Adapter Cable

A USB to 5 volt power adapter is included with the MiniStation. If your MiniStation isn’t getting sufficient power from the USB port it’s plugged into, you can plug this cable into an additional USB port for extra power.

Mobile Assist Cable

If your USB ports cannot supply enough consistent 5v power for best performance from your MiniStation, try the optional accessory Mobile Assist Cable, available from Buffalo Technology (www.buffalotech.com). It smooths and strengthens voltage, letting the MiniStation operate normally even if power quality from the USB port is marginal.

Note: After connecting the Mobile Assist Cable, the Power Booster takes approximately 10-20 seconds to fully charge. Once it is charged it will turn on the MiniStation.

Connecting the MiniStation: Please connect the Mobile Assist Cable to the MiniStation before plugging it into your computer or USB hub.

Disconnecting the MiniStation: When you wish to disconnect and remove the MiniStation, unplug the Mobile Assist Cable from the computer’s USB port before unplugging it from the MiniStation.