Buffalo Technology WZR-AG300NH manual Connecting to a Preexisting Network

Page 18

Connecting to a Preexisting Network

Add an AirStation without changing your existing LAN configuration

1.Set the AirStation into Access Point Mode by moving the switch from ROUTER to AP.

2.Connect one of the AirStation’s LAN ports to an existing router or switch on your network. Nothing should be plugged into the WAN (“Internet”) port.

3.Open LAN Settings - LAN Port Settings and configure the following settings:

IP Address =[192.168.11.1] (Specify an unused network address from the existing LAN.)

Subnet Mask=[255.255.255.0] (Use the same Subnet Mask as the existing LAN.) DHCP Server Function=[Disable]

4.Restart PC.

18

Image 18
Contents Wireless Router & AP Table of Contents Introduction System RequirementsInitial Setup Assemble Your AirStation Your AirStation may be used horizontally or verticallyConnecting your AirStation AirStation Log in to the Configuration Tool Detecting Your Broadband Connection Connecting Wireless Clients to the Access Point Basic Setup Navigating the Menus Initialize/Reboot Aoss Standalone Client device PC card Client Manager Software Aoss Notes Some things to keep in mind with AossAccess Point Mode Connecting to a Preexisting Network Specifications WZR-AG300NH AirStation SpecificationsRegulatory Information AirStation Ieee 802.11 Channel Sets Troubleshooting Common ProblemsDiag LED Activity Table Other Problems Glossary Glossary Glossary To hardware that requires further manual configuration Glossary Glossary Glossary FCC / CE Information FCC WarningPotential restrictive use Warranty Information Contact Information General InquiriesEmail sales@buffalo-technology.com GPL Information North America GPL Information Europe 125/300* High Speed Mode
Related manuals
Manual 7 pages 32.95 Kb