802.11n Wireless PCI Adapter

c. 802.1X

1.Authentication Type: The type selected here must be identical to the type of the 802.1x authentication type you’re using.

2.Session Resumption: Enable or Disable.

3.Domain Name: Input the domain name of 802.1x authentication. This field will be grayed out when authentication type is not EAP-FAST.

4.Use Client: If the authentication type is using PEAP or TTLS, you can use the certificate stored on your computer. If the authentication type is using TLS/Smart Card, this box is always checked.

5.Allow unauthenticated provision mode: This box is always checked and can not be modified.

6.Use protected authentication credential: If the authentication type is using EAP-FAST, you can use protected authentication credential by check this box.

7.Remove: Remove the credential you imported previously.

8.Import: Import the authentication credential file (PAC or al file format), you’ll be prompted to select a credential file from your computer.

9.Protocol: Select the protocol of tunneled authentication. This pull-down menu is only available when authentication type is using PEAP or TTLS. When using EAP-FAST as authentication type, the protocol setting is always Generic Token Card and can not be changed.

10.Password Mode: Select the password mode of EAP-FAST authentication mode. This setting is hidden when the authentication type is not EAP-FAST.