Certificate
To create a new mapping group:
1Click on Add. The Port Mapping Configuration screen appears.
Figure 68: Creating a Port Mapping Entry
2Enter a unique Group name.
3Select interfaces from the available interface list and add them to the grouped interface list using the arrow buttons to create the required mapping of the ports.
4Click on Save/Apply.
Certificate
Use the Certificate screen to add, view, or remove a certificate for use by a peer to verify your identity. A maximum of four certificates can be stored. You can add a certificate either by creating a new one or importing an existing one from a location where one is stored.
Note
Certificates are used with
| 77 |