Wireless Bridge
In this next screen you can select the mode, either access point or wireless bridge that you want the router to be in. In the screen below, Bridge Restrict is enabled, therefore you see the Remote Bridges MAC Address fields. If Bridge Restrict is disabled, then there is nothing left to do afterwards. Click on Save/Apply to continue.
Advanced
Advanced features of the wireless LAN interface can be configured in this section.
Settings can be configured for the following:
•AP Isolation— If you select enable, then each of your wireless clients will not be able to communicate with each other.
•Band— A default setting at 2.4GHz – 802.11g
•Channel— 802.11b and 802.11g use channels to limit interference from other devices. If you are experiencing interference with another 2.4Ghz device such as a baby monitor, security alarm, or cordless phone, then change the channel on your router.
•Auto Channel
56 | 6238 |