Technical speciﬁcation

Digital to Analogue conversion

24-bit multilevel Delta-Sigma DAC

Laser pick-up	3 beam
Laser wavelength	780nm
Numerical aperture	0.45
Dynamic range	106dB
Signal to noise ratio (CCIR)	>100dB
Harmonic distortion (0dB, 1kHz)	<0.005%
Frequency response (±0.5dB)	5Hz–20kHz
Output level (0dB)	2.3Vrms
Output impedance	120Ω
Minimum recommended load	5kΩ

NOTE: All speciﬁcation values are typical unless otherwise stated.

Continual improvement policy

Arcam has a policy of continual improvement for its products. This means that designs and speciﬁcations are subject to change without notice.

Radio interference

The CD62 is a digital audio device which has been designed to very high standards of electromagnetic compatibility.

The CD player and DAC generate, and can radiate RF (radio frequency) energy. In some cases this can cause interference with FM and AM radio reception. If this is the case, keep the CD player and its connecting cables as far from the tuner and its aerials as possible. Connecting the CD player and the tuner to different mains sockets can also help to reduce interference.

EC COUNTRIES -– This product has been designed to comply with directive 89/336/EEC.

USA – This product complies with FCC requirements.

Laser radiation

If an Arcam CD player is operated whilst the outer casing is removed, invisible laser radiation could cause eye damage.

Physical

Dimensions	W430 x D290 x H84mm
Weight	4.6kg nett/6.1kg packe
Power consumption	32VA maximum
Digital output connection	75Ω co-axial
	optical TOSLINK
Supplied accessories
	Mains lead
	CR224 remote control
	2 x AAA batteries
E&OE

CD62