LinkStation Setup

Plug LinkStation’s power cord into the back of LinkStation. Plug the other end of the power code into a power outlet. Then, connect the included Ethernet Cable into the Ethernet port on the back of LinkStation.

Press the power button on the front of LinkStation to turn LinkStation on.

Connect the other end of the included Ethernet Cable into a hub, switch, or router on the network, or connect it directly to a nearby running PC.

NOTE: It is recommended to connect LinkStation to a hub or switch on the network. Connecting it directly to the back of a PC should only be used if absolutely necessary. Many features including DHCP IP Addressing require LinkStation to be connected to a switch or hub.