Installation, Positioning the unit

Installation

�

� �

Positioning the unit

Always place the CD player on a level, firm surface. Placing your player on a set of dedicated sorbothane isolation feet will isolate the unit from its surroundings as well as absorbing the vibrations created within the player itself. You will generally hear some sonic improvements, which makes this an extremely cost-effective upgrade.

Connecting to other equipment

Interconnect cables

Interconnecting cables are not supplied with this CD player. We recommend high quality cables as inferior quality cables will degrade the sound quality of your system. Please contact your Arcam dealer for details of suitable cables.

Audio outputs 3

Connect these to your amplifier’s CD or any other line-level input using suitable high quality interconnect cables. Ensure that the left and right audio outputs from the CD player are connected to the same left and right inputs on your amplifier.

The second set of sockets can be used to connect to a second amplifier set up for multi-room use.

Coaxial digital output 4

Use this socket if you are using a separate digital to analogue converter (DAC) or digital recorder. Connect to the DAC or recorder’s digital input using a suitable 75Ω screened cable.

CAUTION: Never connect the digital output socket to a conventional audio input.

Optical digital output 5

Use this socket if you are using a separate DAC or digital recorder with an optical connection. Connect using a suitable optical cable.

Remote IR input 6 and 12V Trigger input 7

These connections are intended for use in multi-room installations. In normal use there is no need to make any connections to these sockets.

TRIGGER IN – Connecting the 12V trigger output of an Arcam amplifier to this input will cause the CD36 to switch automatically in and out of stand-by when the amplifier is switched off and on.

REMOTE IN – This allows remote control signals to be received by the CD36 if the remote sensor is covered (or otherwise not ‘visible’ to the remote control). An external sensor is used to receive the signals from the remote control, which are then fed to the CD36 (into this input) using a suitable cable. Remote control signals acceptable to the CD36 must be in modulated RC5 format, with a voltage level of between 5V and 15V.

Connecting to a power supply

Both the trigger and remote control inputs require a mono 3.5mm jack, with the tip active and the sleeve grounded.

For the trigger in, the CD36 will come out of stand-by if the voltage on the tip is between 4V and 15V.

CD36

E-4

Mains lead

The appliance is normally supplied with a moulded mains plug already fitted to the lead. If for any reason the plug needs to be removed, it must be disposed of immediately and securely, as it is a potential shock hazard when inserted into the mains socket.

Check that the plug supplied with the unit fits your supply and that your mains supply voltage agrees with the voltage setting 2 indicated on the rear panel of the unit.

If your mains supply voltage or mains plug is different, or you require a new lead, please consult your Arcam dealer.

Plugging in

Push the plug (IEC line socket) of the power cable supplied with the unit into the socket 1 in the back of the unit. Make sure it is pushed in firmly. Put the plug on the other end of the cable into your power supply socket and switch the socket on.

CD36 specifications

The Arcam CD36 is a high-performance CD player that stands out in the world of digital audio reproduction. Designed with an emphasis on sonic fidelity, it embodies Arcam's commitment to delivering an exceptional listening experience. This player showcases cutting-edge features and technologies, making it a remarkable addition to any audio enthusiast's collection.

At the heart of the CD36 is a high-precision CD transport mechanism that minimizes vibration and ensures accurate playback of CDs. The player is equipped with an advanced digital-to-analog converter (DAC) that converts the digital audio signals into analog waveforms with exceptional clarity and detail. Arcam has selected high-quality components for the CD36, ensuring high performance across the entire audio spectrum.

One of the standout features of the Arcam CD36 is its ability to upsample audio signals. This function allows the device to enhance playback quality by converting standard CD audio resolution into a higher sampling rate, resulting in a more detailed and refined sound. Users can enjoy richer soundscapes with improved spatial imaging and depth, which are vital attributes for critical listening.

The CD36 is also equipped with multiple digital outputs, including coaxial and optical connections, making it versatile in terms of integration with other devices in a modern audio system. This allows users to connect the CD player to a variety of external digital-to-analog converters, enabling further customization of their audio experience.

Additionally, the Arcam CD36 features a user-friendly interface with a bright display that provides clear information about the currently playing track and status. The remote control allows for convenient operation from a distance, making it easy to navigate through albums and playlists.

Connectivity extends to the inclusion of both balanced and unbalanced outputs, allowing audiophiles to connect the player to a wide range of amplifiers and audio systems. With a solid build quality, the CD36 is designed not only for durability but also for minimal interference, ensuring pure audio playback.

In summary, the Arcam CD36 is a sophisticated CD player that combines advanced technologies with meticulous engineering. Its precision playback capability, upsampling feature, versatile connectivity options, and user-centered design make it a standout choice for those who value high-quality audio. Whether you’re a casual listener or a serious audiophile, the CD36 promises to enhance your listening experience significantly.