1 of 1
APM CO., LTD
APM-201
Base Unit for Power Over Ethernet
1. | Features： |
|
1.1. |
| |
1.2. IEEE 802.3af compliant |
| |
1.3. No Software Required |
| |
1.4. Easy to Install |
| |
1.5. Use Existing Ethernet Cable |
| |
2. | Input Specifications： |
|
2.1. | Power Interface ： DC Jack | (See Pin Assignment) |
2.2. | Data Interface ： | (See Pin Assignment) |
2.3.Input Voltage ： 48V ± 10 % * Applied from External Switching Adapter ( 90 ~ 264Vac)
2.4.Input Current ： 400 mA Max.
3. Output Specification： | 4. General Specification： |
3.1. PD Detection & Classification ： | 4.1. Operating Temperature ： 0℃ ~ +50℃ |
IEEE 802.3af compliant | 4.2. Storage Temperature ： |
3.2. Interface ： | 4.3. Humidity ： Up to 90 % |
3.3. Output Voltage ： 48V ± 10 %(42,53) | 4.4. Cooling ： Free air convection |
3.4. Output Current ： 0.35 A Max. |
|
3.5. Output Power ： 15.4W Max. |
|
3.6. LED Display ： PoE Not Active (Orange), PoE Active (Green)
5. Pin Assignment :
Pin | LAN IN | LAN Out | Pin |
1 | Tx (+) | Tx (+) | 1 |
2 | Tx | Tx | 2 |
3 | Rx (+) | Rx (+) | 3 |
4 | N.C. | +48V | 4 |
5 | N.C. | +48V | 5 |
6 | Rx | Rx | 6 |
7 | N.C. | GND | 7 |
8 | N.C. | GND | 8 |
6. Mechanical Dimension :
Units : m/m & Tolerance : 0.xx ± 0.25
1F, No.49, Alley 24, Lane 75, Sec 3,