Introduction

AUDIO ANALOGUE does not take any responsibilities in the following cases:

Whenever the operational procedures related to the use and the maintenance of the equipment as described in this manual are not respected.

Whenever damages to the equipment occur because of fixing and modifications made form non-authorized staff or because of normal deterioration of the system.

No part of this manual can be reproduced by any means, transmitted or copied for private or public use without private authorization from AUDIO ANALOGUE.

The information contained in this manual is related to the data kept by AUDIO ANALOGUE at the moment of the issue o f this publication; AUDIO ANALOGUE has the right to make changes to this document without prior notice.

The equipment has been projected and manufactured according to the Regulations of the Community 89/336/CEE and is marked CE. This equipment can’t be used for different purposes other than those for which it has been manufactured.

AUDIO ANALOGUE does not take any responsibilities for accidents or damages due to improper use of the equipment.

WARNING

Please do respect the safety standards contained in this manual before starting to operate the equipment.

Do not open the equipment. No further interventions than those described in this manual should be made. For technical assistance, please consult a qualified technician or an AUDIO ANALOGUE dealer.

Not respecting the instructions contained in this manual will invalidate the terms and conditions of the guarantee.

NECESSARY PRECAUTIONS FOR SAFETY AND MAINTENANCE

ATTENTION: before starting any operation, use or maintenance of the equipment it is strictly necessary to understand the following manual.

To avoid any accidents or hazards it is necessary to follow the following regulations.

Activate the equipment only prior checking if the installation has been properly made, and if it is related to the instructions contained in this manual.

Avoid installing the equipment in places subjected to extremely high temperatures or humidity. Check that the labels containing information about safety are always visible and in good conditions.

Ensure to not obstruct ventilation, to avoid excessive overheating. The equipment should be kept to a minimal distance of 15 cm from any object and not to place on carpet or other soft surfaces. Also the installation close to radiators or in close environments without ventilation should be avoided.

Do not switch on the equipment until it has not been correctly and completely installed.

Only supply the equipment with the kind of the electric supply as stated on the appropriate label. If in doubts about the kind of supply available, please consult an expert technician for technical assistance.

The equipment needs to be wired to an earth terminal. The external case is metal made; a defective connection with the earth may be dangerous.

In case damages occurs to the supply cable, it should be immediately replaced with the same kind of cable. This operation should be only made prior to disconnecting the main supply.

Do not place objects on the supply cable and check that this is not positioned in way through. The cable should not be knotted or curly.

Replace the fuses always with other of the same kind.

Do not use the equipment close to the water or other liquids. If liquid entered the equipment, the plug should be disconnected from the socket avoiding to touch the metal parts. Competent technical staff should be asked to check the equipment before operating it again.

Do not place recipients containing liquids on the equipment. Even when it is switched off. Keep the equipment far from sources of heat such as the solar light, kitchens, radiators etc… Always unplug the supply cable during rainy weather.

Always Switch off and unplug the supply cable before cleaning the equipment externally.: this operation should be made using a dry and soft cloth. Never use alcohol based cleaning material.

If the amplifier was carried from an extremely cold environment to and extremely hot one, it could create internal condensation, causing possible bad functioning.

If this occurs, please wait for at least an hour before using it again, to allow it to gradually reach room temperature. When not used for long periods, please unplug the equipment.

INSTRUCTIONS TO PUT IT OUT OF SERVICE

Consult qualified staff

Follow the regulations of the current legislation regarding recycling and waste disposal.

24, 192 specifications

Audio Analogue SRL 24,192 is a high-performance digital-to-analog converter (DAC) that has garnered attention for its remarkable sound quality and innovative technologies. Designed for audiophiles and professionals alike, this device stands out in the crowded marketplace of audio equipment, offering both versatility and exceptional audio fidelity.

One of the main features of the Audio Analogue SRL 24,192 is its support for high-resolution audio formats. The DAC can handle data rates up to 24-bit/192 kHz, allowing it to process and reproduce audio with impressive detail and dynamic range. This capability is essential for those who seek to enjoy high-fidelity music recordings, which often feature intricate subtleties that lesser audio components can overlook.

The SRL 24,192 is built with a meticulously designed analog section that incorporates premium components. This attention to detail ensures that the output stage provides a clean and natural sound, minimizing distortion and noise. Consequently, listeners can expect a rich audio experience characterized by clarity and precision across different musical genres.

Another noteworthy feature of the Audio Analogue SRL 24,192 is its robust connectivity options. It is equipped with multiple input configurations, including USB, coaxial, and optical inputs, which allow seamless integration with various digital sources. This flexibility caters to modern audio setups, as users can easily connect smartphones, computers, or dedicated media players.

The device also includes advanced digital signal processing technologies that optimize sound reproduction. These technologies are designed to enhance the listening experience by reducing jitter, a common issue that can detract from audio quality. By utilizing sophisticated algorithms, the SRL 24,192 guarantees that the signal integrity is preserved throughout the conversion process.

In terms of user experience, the Audio Analogue SRL 24,192 is designed with simplicity in mind. The intuitive interface features easy-to-navigate controls, enabling users to switch between different inputs and adjust settings without fuss. Additionally, the sleek, modern aesthetics of the DAC make it an appealing addition to any audio system setup.

Overall, the Audio Analogue SRL 24,192 is a compelling choice for anyone seeking a superior digital-to-analog conversion solution. Its combination of high-resolution audio support, quality components, versatile connectivity, and intelligent processing technology makes it a standout product in the realm of audio equipment. As the demand for high-fidelity audio continues to grow, the SRL 24,192 positions itself as a reliable and sophisticated choice for enhancing the listening experience.