Asante Technologies FM2008/2009 user manual Web Based Management, Snmp Network Management

Page 8

between the computer and the switch, while Telnet management is done over the network. Once the switch is on the network, use Telnet to log in and change the configuration.

Note: The default IP address of the switch is 192.168.0.1. Both the default user name and the default password are root.

Web Based Management

The switch provides an embedded HTML web site residing in flash memory. It offers advanced management features and allows users to manage the switch from anywhere on the network through a standard browser such as Microsoft Internet Explorer.

SNMP Network Management

SNMP (Simple Network Management Protocol) provides a means to remotely manage network devices, and to monitor statistics, performance,

and security.

FriendlyNET FM2008/2009

User’s Manual

Image 8

Contents FriendlyNET FM2008/2009 Quick Start Guide USA Table of Contents Introduction Features Intelligent Management FeaturesPackage Contents Web Based Management Snmp Network ManagementFM2009 Managed Switch Hardware DescriptionFM2009 managed switch with VF-45 Connector FM2009 managed switch with SC Connector multi-modeFM2009 managed switch with SC Connector single-mode LED Indicators FM2009 managed switch with MT-RJ ConnectorRear Panel Installation Into an Equipment Rack Attaching Rubber FeetPower On Equipment Rack GuidelinesConnecting a Terminal or PC to the Console Port Console ManagementCommunication parameters settings Console MenuMain Menu Status and Counters Port StatusActions- Press the Tab the Enter key Port Counters System InformationSwitch Static Configuration Administration Configuration Actions Actions Change Username Port/Trunk Configuration Port Mirroring Configuration Vlan Configuration Vlan Configure Create a Vlan Group Edit/Delete a Vlan GroupCreate a Vlan Group Select Edit or Delete User’s Manual Priority Configuration MAC Address Configuration Add static MAC address Delete static MAC address Miscellaneous Configuration MAC Age Interval Broadcast Storm Filtering Max bridge transmit delay bound STP Enable Bridge Priority Forward Delay PortState View the spanning tree status for each port Snmp Community Strings Trap Managers Actions Gvrp Link Aggregation Control Protocol Lacp State Activity This page, you may view the trunking group information Reboot Switch Xmodem UpgradeUser’s Manual User’s Manual Web-Based Management Web Management FunctionHome Port Status IP Address AdministratorPort Statistics Switch Settings Advanced Priority Queue Service settings User’s Manual Console Port Information Port Controls TrunkingAggregator setting Aggregator Information Filter Database Has quit to be a member of a specific multicast group Port Security MAC Address Filtering Vlan configuration Click MAC FilteringProtocol-based VLANs Port VID Configure port VID settings Spanning Tree Ingress FilteringUser’s Manual Priority Port Mirroring System Options Tftp Update Firmware Security ManagerTftp Backup Configuration Configuration BackupTftp Restore Configuration Reset System RebootTechnical Specifications Improper Network Topologies Faulty or loose cablesNon-standard cables Diagnosing LED Indicators CablingFriendlyNET 2-Year Limited Warranty User’s Manual

FM2008/2009 specifications

Asante Technologies FM2008/2009 is a powerful networking solution that showcases the company's commitment to delivering advanced Ethernet switching and networking functionalities. Designed primarily for small to medium-sized businesses (SMBs), the FM2008/2009 series offers a range of features and technologies that enable reliable performance, scalability, and ease of use.

One of the standout features of the FM2008/2009 series is its support for Gigabit Ethernet, which allows for high-speed data transfer across the network. With up to 8 Gigabit Ethernet ports, these switches facilitate seamless communication between devices and help minimize latency, enabling businesses to maintain optimal performance in data-heavy environments.

The FM2008/2009 series also incorporates advanced Layer 2 switching capabilities. These capabilities include support for VLANs (Virtual Local Area Networks), which help segment network traffic for improved security and performance. By creating separate networks within the same physical infrastructure, businesses can manage their traffic more efficiently, reducing congestion and ensuring that mission-critical applications receive the bandwidth they need.

With built-in Quality of Service (QoS) features, the FM2008/2009 ensures that network resources are allocated effectively. This technology prioritizes voice and video traffic, guaranteeing smooth and reliable performance for real-time applications. As a result, businesses can rely on the FM2008/2009 series to support their communication needs without interruption.

Another noteworthy characteristic is the intuitive web-based management interface, which simplifies network administration. This easy-to-use interface enables IT staff to configure and monitor the network with minimal effort. Features like SNMP (Simple Network Management Protocol) support provide additional tools for network management, allowing for remote monitoring and troubleshooting.

In terms of physical design, the FM2008/2009 switches are compact and rack-mountable, making them suitable for various installation environments. Their robust design caters to the demands of modern networks while ensuring reliability and durability.

In conclusion, Asante Technologies FM2008/2009 series offers a balance of speed, efficiency, and manageability, making it an attractive solution for SMBs looking to enhance their networking capabilities. With support for Gigabit Ethernet, VLANs for traffic segmentation, QoS for prioritizing applications, and a user-friendly management interface, these switches provide everything needed to build a reliable and efficient network infrastructure.