MULTILANGUAGE MANUAL
Before starting procedure, be sure that:
- There isn’t any AP in WPS mode active.
-Access Point that are in WPS mode have finished its scan for devices.
1.Set Enrollee mode in Config Mode.
2.Click on PBC button to start sincronization process between AP and client.
3.Press PCB button on AP.
For more informations:
5.6 Radio On/Off
It can enable or disable RF module.
5.7 About
This screen shows informations about driver and utility version.
Please see this screen before download driver upgrade from www.atlantis- land.com
.
NetFly 300 | 44 |