Audio Authority EDP-11 user manual Installation, Transmitter Receiver

3.0 INSTALLATION

Before connecting the EDP-11 Cat 5 extender system, verify that the display device on the receiving end can support the output resolution and signal format by connecting it directly to the source device via a short, known good, HDMI cable. The panel drawings below show the Cat 5 signal output/input connections, power connection.

Transmitter	Receiver
Model 1384TD	Model 1384RD
FRONT VIEW	FRONT VIEW

HDMI INPUT	HDMI OUTPUT
FROM SOURCE
	TO SINK (E.G.,
	VIDEO DISPLAY)
CONNECT AC
ADAPTER TO
POWER OUTLET

	Transmitter		Receiver
	Model 1384TD		Model 1384RD
	REAR VIEW		REAR VIEW
Model 1384TD Transmitter		Model 1384RD Receiver
www.audioauthority.com		www.audioauthority.com
800-322-8346		800-322-8346

CAT 5e/6 CABLES

IMPORTANT:

FABRICATE CABLE

ENDS TO EIA-568B

AND TEST

5