Atlantis Land A02-G4(8)/M2 manual LED Indicators

Page 14

AC Power Connector This is a three-pronged connector that supports the power cord. Plug in the female connector of the provided power cord into this connector, and the male into a power outlet. Supported input voltages range from 100 ~ 240 V AC at 50 ~ 60 Hz.

LED Indicators

The LED indicators of the Switch include Power, Link/Act, 1000Mbps and 100Mbps. The following shows the LED indicators for the Switch along with an explanation of each indicator.

The 4-port 10/100/1000Mbps Gigabit Ethernet Switch LED

indicators

POWER: This indicator lights green when the Switch is receiving power, otherwise, it is off.

LINK/ACT: These LED indicators are lighted up when there is a secure connection (or link) to the desired port. The LED indicators blinking whenever there is reception or transmission (i.e. Activity—Act) of data occurring at a port.

11

Image 14
Contents USER’S Guide FCC Warning CE Mark WarningTechnical Specifications Table of ContentsAbout this Guide TermsOverview of this User’s Guide Gigabit Ethernet Technology IntroductionFast Ethernet Technology Switching Technology Features Performance featuresUnpacking SetupUnpacking and Setup Desktop or Shelf Installation Rack Installation optionalConnecting Network Cable Power on Identifying External ComponentsFront Panel Rear PanelLED Indicators Product Support Technical Specifications GeneralPhysical and Environmental