Atlantis Land A02-F24-4G user manual WEB Configuration, Login

Page 20

26-Port Dual Web Rack Switch

Chapter 4

WEB Configuration

The 24+4G-Port 10/100/1000Mbps Gigabit Ethernet Web Smart Switch has a Web GUI interface for smart switch configuration. The Switch can be configured through the Web Browser. A network administrator can manage, control and monitor the switch from the local LAN. This section indicates how to configure the Switch to enable its smart functions including:

•Port Setting (Speed/Disable, Duplex mode, Flow Control and Port base QoS)

•Virtual LAN Group setting (VLAN)

•Trunking

•Mirroring

•System Setting

•Device status and Statistic

4.1 Login

Before you configure this device, note that when the Web Smart Switch is configured through an Ethernet connection, make sure the manager PC must be set on same the IP network. For example, when the default network address of the default IP address of the Web Smart Switch is 192.168.0.1, then the manager PC should be set at 192.168.0.x (where x is a number between 2 and 254), and the default subnet mask is 255.255.255.0.

Open Internet Explorer 5.0 or above Web browser.

Enter IP address http://192.168.0.1 (the factory-default IP address setting) to the address location.

Or through the Web Management Utility, you do not need to remember the IP Address, select the device shown in the Monitor List of the Web Management Utility to settle the device on the Web Browser.

When the following dialog page appears, remain enter the default password "admin" and press Login to enter the main configuration window.

After entering the password, the main page comes up, the screen will display the device status.

14

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Port Dual Web Rack Switch Page Copyright CE Mark WarningFCC Warning UL WarningTable of Contents Chapter Appendix a Page Switch Features About This GuideTerms/Usage Gigabit Ethernet TechnologyVlan Virtual Local Area Network Switching TechnologyFast Ethernet Technology Features QoSRack Mounting Package ContentsInstallation Connecting Network Cable Product Code A02-MSW2Fiber moduleFront Panel AC PowerIdentifying External Components Understanding LED Indicators Rear PanelLed System Ports 1~24 10/100M Status LEDsPorts 25~26 Gigabit Status LEDs Ports 27~28 mini-GBIC Status LEDsInstalling the Web Management Utility Web Management UtilityDiscovery List System word definitions in the Discovery ListMonitor List System word definitions in the Monitor ListDevice Setting Toolbar WEB Configuration LoginMirror Setup MenuPort Settings Port Dual Web Rack Switch Vlan Settings Virtual Local Area Network QoSTrunk Setting MaintenenceStatus StatisticsPort Dual Web Rack Switch System Settings Trap Set Password Backup SettingReset Settings LogoutRJ-45 Pin Specification RJ-45 Connector pin assignmentTechnical Specifications Appendix C Support
Top Page Image Contents