♦One
♦Four rubber feet with adhesive backing
♦One external power adapter
♦This User’s Guide
If any item is found missing or damaged, please contact your local reseller for replacement.
Setup
The setup of the Switch can be performed using the following steps:
♦The surface must support at least 5 kg.
♦Install the Switch in a fairly cool and dry place. See Technical Specification for the acceptable operation temperature and humidity ranges.
♦Install the Switch in a site free from strong electromagnetic source, vibration, dust, and direct sunlight.
♦Leave at least 10 cm of space at the left and right hand side of the Switch for ventilation.