Configuring TCP/IP | 5 |
Chapter 5: Configuring TCP/IP
This section contains two examples of configuring TCP/IP in a Windows environment. Most computers already have the TCP/IP configuration enabled. Use the following procedures to verify that the configuration is set up. Configure all client computers on your network for TCP/IP (the protocol that controls communication among computers). Two examples are provided in this document:
•Configuring TCP/IP in Windows XP
•Configuring TCP/IP in Windows Vista
NOTE
Follow the instructions in your computer user manual for other Operating
Systems.
Configuring TCP/IP in Windows XP
1.On the Windows desktop, click Start to display the Start window:
Figure 5-1: Windows XP Start Window
2.Click Control Panel to display the Control Panel window. The display varies, depending on your Windows XP view options. If the display is a Category view as shown in Figure 5-2, continue with Step 3. Otherwise, skip to Step 5.
FEB 2009 |
|