American Audio DCD-PRO500 Time Display, Pitch Bending, Track Program Play, Setting a CUE Point

Page 11

BASIC OPERATIONS (CONT.)

loops cue point. (Fig. 16). This disengages the SEAMLESS LOOP mode and allows you to edit the loops ending point.

(2)Press OUT/EXIT BUTTON (18) again for a new loop ending point (Fig. 16).

(3)FOR A SHORTER LOOP: Press the OUT/EXIT BUTTON (16) at sooner point in the track.

(4)FOR LONGER LOOP: Press the OUT/EXIT BUTTON (16) at later point in the track.

12.TIME DISPLAY

•During normal playback, pressing the TIME BUTTON (9), will change the display time display information (47) to one of the following settings:

(1)ELAPSED playing time (45).

(2)REMAINing time of a track (36).

(3)TOTAL remaining time of the disc (35).

13. PITCH BENDING

•This function momentarily increases or decreases the playback speed of a CD respectively when the + PITCH BEND (28) or - PITCH BEND (26) button is pressed. The extent to which the speed changes is proportionate to the amount of time the button is pressed. For example, if the + PITCH BEND BUTTON (28) is held down continuously, the CD’s speed increases and will continue to increase until reaches a maximum of 16% gain in speed. When you release the + PITCH BEND BUTTON (28) the speed of the CD will automatically return to it’s previous speed.

•The pitch can be changed from +/- 8%, +/- 12% or +/- 16% range. See changing PITCH PERCENTAGE (Page 7/29) .

•The jog wheel will temporarily bend the pitch if a track is in play mode. Rotating the wheel clockwise will speed up your track and rotating the wheel counter-clockwise will slow the track down. The speed that you rotate the JOG WHEEL (13) determines the percentage (%) of the PITCH BEND.

14. TRACK PROGRAM PLAY

•This function allows you to program up to 20 tracks and have them replayed in any order.

•To program a track in to memory:

(1)Be sure the drive is in PAUSE or CUE MODE.

(2)Press the PROG. BUTTON (10) to activate the units program mode. The program indicator LED above the

PROG BUTTON (10) will light and the PROGRAM INDICATOR (33) in the LCD DISPLAY (27) will turn on indicating that PROGRAM MODE has been activated.

(3)Select a Track by using the NUMBER BUTTONS (23), and again press PROG. BUTTON (10) this will enter the track into memory.

(4)Repeat this up to 19 times (ie. up to 20 tracks can be programmed). If you keep pressing the PROG. BUTTON (10) the LCD DISPLAY (27) will indicate which tracks have been programmed.

(4)Press the PLAY BUTTON (25) to begin playing programmed tracks.

(5)To cancel the program press and hold down the PROG. BUTTON (10) for more than two (2) seconds.

15.SETTING A CUE POINT:

•A cue point is a starting point for a song. You may set a cue point anywhere in a CD or song. * You may set up to seven independent cue points per disk.

* Cue points are stored in the CUE BUTTONS 1-6 (4) and the IN R./CUE BUTTON (17). * There are two (2) ways to set a CUE point:

1)You may press the IN R./CUE BUTTON (17) on the fly (when the CD is playing). This will set a CUE Point without interruption of music. Pressing the CUE BUTTON (15) will now return you to the point in the song at which you pressed the IN R./CUE BUTTON (17). You may now store this CUE Point into one of the available

CUE BUTTONS 1-6

-After you have set your cue point by pressing the IN/R. CUE BUTTON(17) press the MEMORY CUE BUTTON

(3). The red Memory Cue LED will come on. You may now press one of the six (6) CUE BUTTONS (4) to store your cue point into memory. After pressing one of the CUE BUTTONS (4), the button you selected will flash briefly and the red Memory Cue LED will shut off and the Cue button will light.

2)You may also use the JOG SHUTTLE (13) to set a cue point.

-While the CD is in PAUSE mode, use the JOG WHEEL (13) forward or reverse to find your desired starting beat. Once you have found your desired position hit the PLAY BUTTON (25) to set your cue point. Once you have set your CUE Point press the MEMORY CUE BUTTON (3). The red Memory Cue LED will come on, indicating that memory is ready to set. You may now press one of the six (6) CUE BUTTONS (4) to store your cue point into memory. After pressing one of the CUE BUTTONS (4), the button you selected will flash briefly

American DJ® AUDIO • DCD-PRO500™ INSTRUCTION MANUAL • PAGE 11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Designed for the working dj Do not open Risk of electric shock Important Safety Items for U.S.A. & Canada Model onlySafety Instructions General Notes on USE Checking the ContentsInstalling the Units PreparationsMain Features Remote Unit Front Figure Time Button GO to Time The Time button switchGeneral Functions and Controls LCD Display Figure General Functions and ControlsControl Unit Main Unit & Player Unit Rear PanelsBasic Operations Editing a Loop Frame SearchScanning Fast Forward / Fast Reverse Seamless Loop PlayTrack Program Play Setting a CUE PointTime Display Pitch BendingSET GO to Time Function Restore CUE, Sampled Loop Memory FunctionUsing the Built In Sampler USE Number KEYFlash Start CUE Buttons Matching the Beats PER Minute BPMSample Reverse Play Compact Discs Before Switching OFF the PowerPrecautions on Handling Compact Discs Precaution on StorageGeneral Specifications

DCD-PRO500 specifications

The American Audio DCD-PRO500 is a professional-grade dual CD player designed specifically for DJs and audio enthusiasts who demand reliability, versatility, and superior sound quality. This robust piece of equipment integrates advanced technology with user-friendly features, making it a popular choice in various performance environments, including nightclubs, mobile parties, and event venues.

One of the standout features of the DCD-PRO500 is its dual CD deck configuration, which allows DJs to seamlessly mix tracks from two separate CD sources. This capability is enhanced by a wide range of playback functions, including pitch control, loop capabilities, and programmable playback options. This flexibility provides DJs with the creative freedom to manipulate sound in a way that suits their unique style, contributing to more dynamic performances.

The DCD-PRO500 utilizes a high-quality digital signal processor, which ensures crystal-clear audio reproduction. The player supports multiple playback formats, including standard audio CDs, CD-Rs, and MP3 CDs, making it versatile enough to handle different audio sources. The built-in pitch control feature allows users to adjust the tempo of tracks from -16% to +16%, offering precise control for beatmatching and smooth transitions between songs.

A significant aspect of its design is the user interface, featuring an intuitive layout with easy-to-read LED displays. The well-positioned buttons and jog wheels facilitate quick navigation through tracks and settings, allowing DJs to concentrate on their performance rather than fumbling with complicated controls. The DCD-PRO500 also boasts hot cue and seamless loop functionality, enabling users to create exciting live mashups and continuous play scenarios.

In terms of connectivity, the DCD-PRO500 includes balanced XLR outputs, RCA outputs, and a headphone jack, providing a variety of options for connecting to mixing consoles and sound systems. Its durable construction ensures the player can withstand the rigors of frequent transportation and use, making it an ideal choice for mobile DJs and live performers.

Overall, the American Audio DCD-PRO500 combines impressive audio performance with practical features tailored for DJs. Its advanced technology, user-friendly interface, and robust build quality make it a trustworthy tool in any DJ's arsenal, allowing for creative expression and flawless execution during live performances. Whether mixing tracks at a club or entertaining guests at a private event, the DCD-PRO500 is designed to meet the high expectations of professional DJs.
Top Page Image Contents