Motorola 574808-001-c, 57076300600, SBG6580 Series manual Installing the Modem

Page 15

B

Before drilling holes in the wall, check the structure for potential damage to water, gas, or electrical lines.

1.Position and secure the wall mounting template on the wall to mark the holes. There must be .10 inch (2.5 mm) between the wall and underside of the screw head.

2.Select an appropriate depth and diameter to drill the holes to a depth of at least 1½ inches (3.8 cm).

Note: The installer must determine the depth of the hole, the necessary hardware and must be careful to select the appropriate depth and diameter.

3.Reconnect the coaxial and Ethernet (or USB) cables after mounting the gateway.

4.Re-plug the power cord into the +12VDC Power connector on the gateway and the electrical outlet.

5.Arrange the cables to prevent any safety hazards.

6.Verify the gateway is still securely attached to the wall.

Installing the Modem •

Motorola SURFboard • User Guide

7

Image 15

Contents

Motorola SURFboard Safety and Regulatory Information Table of Contents Software License Warranty Information Read This Before You Begin Safety and Regulatory InformationFCC Statements Industry Canada IC Statement Restrictions on the Use of Wireless Devices Contact Information BoxSystem Requirements Front Panel Product OverviewRear Panel About Wi-Fi Protected Security Feature WPSConnecting the SBG6580 Installing the ModemWall Mounting the Modem Installing the Modem Wall Mounting Template Restoring the Default Username and Password Connecting to the InternetClick Start, Settings, and Control Panel Testing Your Internet ConnectionConfiguring TCP/IP for Windows XP Configuring TCP/IP for Windows VistaRenewing the IP Address in Windows XP, Vista, or Configuring TCP/IP for WindowsCreating a Backup Copy of Your Modem Settings Restoring Your Modem Configuration Using a Backup CopyPerforming a System Status Check Activate the Dhcp Server Using the Dhcp Server FeatureSelect the WPA/WPA2 Encryption type Create a Primary Wireless NetworkClick Wireless Click Primary Network Select an Automatic Security Configuration optionClick Wireless Click Guest Network Enable the Guest Network Create a Guest Wireless NetworkCreate a Wi-Fi Network Using the WPS Feature Click WirelessSelect Restore Wireless Defaults and Apply Click Parental Control Enable Parental ControlsCreate Policies to Block or Allow Content Check the Enable Parental Control boxCreate a Time of Day Policy ToD Filter Create an Override PasswordClick User Setup Add Users to the Parental ControlsTroubleshooting Icon Status IF, During Startup IF, During Normal Operation Front Panel Icons and Error ConditionsProduct Specifications Product Specifications Network Software License You mayYou may not Government Restricted Rights Warranty Information Software License & Warranty Motorola, Inc Tournament Drive Horsham, PA 19044 U.S.A

Related manuals

Manual 36 pages 46.66 Kb

Manual 36 pages 7.62 Kb