Wall Mounting the Modem

Using the Energy Conservation Switch

The Energy Conservation switch is a Power on/off button used to shut off power to the SB6121 when high-speed data services are not being used.

•Push button in the ON position (pushed in) to power on the cable modem

•Push button in the OFF position (pushed out) to power off the cable modem

If you choose to mount the cable modem on a wall, do the following before starting:

•Locate the unit as specified by the local or national codes governing residential or business cable TV and communications services.

•Follow all local standards for installing a network interface unit/network interface device (NIU/NID).

•Make sure the power cord is disconnected from the wall outlet and all cables are removed from the back of the cable modem before starting the installation.

•Decide if you are mounting the modem horizontally or vertically.

•Make sure you have the following items:

Wall-mounting template

Applicable screwdriver: Phillips or flathead

Two M3.5 (#6) screws with a flat underside and maximum screw head diameter of 9.0 mm to mount the cable modem.

Note: If possible, mount the modem to concrete, masonry, a wooden stud, or some other solid wall material. Use anchor bolts if necessary (for example, if you mount the unit on drywall).

Installing the Modem • Wall Mounting the Modem

SB6121 DOCSIS 3.0® Cable Modem • Installation Guide

Uncontrolled Document