Aiwa CDC-X237 manual Auxiliary Equipment, Other Functions, Changing the key illumination color

Labeled-side up

Track number

Elapsed playing time CD indicator

ToPress

Note

During Shuffle Play, pressing r allows you to skip only to the beginning of the current track, not to the previous track.

AUXILIARY EQUIPMENT

Listening to a cassette/MD/MP3 portable

player or other equipment

You can listen to equipment connected to the unit. Refer to the operating instructions for the corresponding equipment for more detailed information.

Be sure to remove inserted CDs to prevent possible damage to the unit before connecting the equipment.

Eject a CD

Skip to the next track

Go back to the beginning of the current track Each extra press skips backward one extra track

Locate a specific point in a track

z

t/g

r/f

Press and hold r/f or t/guntil you find the point.

Jog dial (PUSH-SOURCE) AUX jack

1	Connect a cassette/MD/MP3 portable player or other
	equipment to the unit’s AUX jack (3.5 mm dia.).
2	Press Jog dial (PUSH-SOURCE) repeatedly until
	“AUX” appears on the display.

Note

•When you play a CD that is already inserted, CD play starts at the point where it stopped the previous time. A newly inserted CD starts from the first track.

•A CD-R or CD-RW may take some time to start playing back, but this is not a malfunction.

•If a CD-R or CD-RW with no data is inserted, “E03” will appear in the display. The unit cannot play such discs.

Intro Play

You can locate a desired track by monitoring the first 10 seconds of all the tracks on a CD.

1Press INT during CD play. “INTRO” appears on the display.

2Press INT again when the desired track is played. The unit returns to normal CD play.

One track Repeat Play

You can play a track repeatedly.

1Press REP1 during CD play.

“REP1” appears on the display.

To cancel One track Repeat Play, press REP1 again.

Shuffle Play

You can play all the tracks in random order.

1Press SHUF during CD play.

“SHUF” appears on the display.

To cancel Shuffle Play, press SHUF again.

5 ENGLISH

During AUX mode, the clock display appears.

OTHER FUNCTIONS

SEL

PS

Jog dial (PUSH-SOURCE)

Changing the key illumination color

You can choose blue or red as the key illumination color.

1Press and hold Jog dial (PUSH-SOURCE) until “ILL” appears on the display.

2Turn Jog dial to select “1 (for blue)” or “2 (for red).”

Setting the dimmer of the display

1Press and hold SEL until “D” appears in the display.

2Turn Jog dial to select “0 (bright)” or “1 (dimmed).”

Displaying the VU level indicator

1Turn off the unit.

2Press and hold PS until “VU” appears in the display.

3Turn Jog dial to selection (level indicators appear) or off (level indicators disappear).

4Press PS.