Delta DSP9612 manual SW1 DIP Switch Settings

Page 13

Installation

SW1 DIP Switch Settings

SW1 is an 8-position DIP switch. Table 2-1 shows the modem switch settings for DIP switch SW1. A description of the SW1 switch settings follows the table.

Note: SW1 settings apply for both high-speed fast-poll and low- speed (FSK) modes

Table 2-1. Modem Switch Settings for DIP Switch SW1

 

 

 

Switches

Switch Settings

 

ON

OFF (Default)

SW1-1 1-4: Transmit Level (page 15)

(see Table 2-2 on page 15)

 

 

 

SW1-5: Receiver Dynamic Range

10 to 43 dBm

+3 to 30 dBm

(page 16)

 

 

SW1-6: TX Cable Equalizer (page 16)

Enabled

Disabled

 

 

 

SW1-7: RX Cable Equalizer (page 16)

Enabled

Disabled

 

 

 

SW1-8: Anti-streaming (page 16)

Active

Inactive

 

 

 

Page 14

Image 13
Contents DSP 9612 Flash Poll Modem User’s Guide Contents Contents Chapter Introduction Features Applications Network of Multipoint ConfigurationIntroduction Unpacking Your Hardware Chapter InstallationAdditional Items You Need Hardware Overview InstallationFront View Finding a Suitable Location Installation SummaryConfiguring the Modem SW1 DIP Switch Settings SW1-1 through SW1-4 − Transmit Level SW1-5 − Receiver Dynamic Range SW2 DIP Switch Settings SW2-1  FSK Mode SW2-3  FSK Soft Carrier Bell 202 FSK Mode Only SW2-6  FSK CD Delay Bell 202 Mode Only SW3 DIP Switch Settings SW3-1 − Fast Poll Auto Rate/FSK SW3-2 − Data Rate Fast-Poll Mode Only SW3-5 − Transmitter Termination SW3-8 − Carrier Control Shows the transmission line interface Connecting to a Transmission LineTransmission Line Interface Connecting to a Voltage SourceConnecting an RS-232 Device DLB LEDsIllustrates these three diagnostics Loopback Control SwitchProblem Solving Appendix a TroubleshootingProblem Appendix B DIP Switch Summary DIP Switch Summary General Specifications Appendix C SpecificationsPower supply Mechanical SpecificationsInterface Connector Pin Assignments RS-232 DTE Interface Environmental SpecificationsCompliances Specifications Appendix D Compliances Department of Canada Statement Appendix E Limited Product Warranty Return Merchandise Authorization RMA Procedure Appendix F RMA ProcedureRMA Procedure

DSP9612 specifications

The Delta DSP9612 is a powerful digital signal processor that has gained attention in various fields, particularly in audio processing, telecommunications, and embedded systems. With a focus on performance and efficiency, the DSP9612 offers a combination of advanced features and technologies that cater to the demands of modern applications.

One of the main features of the Delta DSP9612 is its high-performance architecture. It supports a range of data types, including fixed-point and floating-point formats, which enables it to efficiently handle complex algorithms and high-speed processing requirements. The DSP operates at clock speeds of up to 300 MHz, allowing for rapid execution of mathematical operations, making it ideal for real-time applications.

Another significant characteristic of the DSP9612 is its versatility. The processor is designed to support multiple communication interfaces, including I2C, SPI, and UART, which facilitates easy integration with various peripherals and systems. This flexibility is a key advantage for developers looking to create custom solutions tailored to specific needs.

The Delta DSP9612 also boasts an advanced memory architecture that enhances data access speed. It features both on-chip and off-chip memory options, accommodating the storage requirements of complex algorithms while minimizing latency during data processing. With ample RAM and flash memory options, developers can efficiently manage data-intensive tasks without compromising performance.

Moreover, the DSP9612 incorporates numerous built-in digital signal processing functions. These include filters, FFT (Fast Fourier Transform) algorithms, and audio codecs, which are essential for audio signal manipulation and enhancement. This built-in functionality reduces the need for additional external components, simplifying system design and lowering overall costs.

The Delta DSP9612 is optimized for low power consumption, making it suitable for battery-operated devices and applications where energy efficiency is a priority. Its power management features help to extend the operational life of devices while maintaining peak performance.

In summary, the Delta DSP9612 stands out in the digital signal processing landscape due to its high-performance architecture, versatility, advanced memory capabilities, built-in DSP functions, and low power consumption. As technology continues to evolve, the DSP9612 remains a reliable choice for developers seeking robust and efficient solutions in audio processing, telecommunications, and embedded systems.