UPDATING ROUTER or ADAPTER FIRMWARE
You may need to update your CradlePoint router or adapter firmware to support the MC100E modem. To update your product, follow the steps below.
HOW TO DOWNLOAD FIRMWARE
1)Navigate to CradlePoint’s support page www.cradlepoint.com/support
2)Select your product from the list and download the most recent firmware file to your desktop.
HOW TO UPDATE FIRMWARE (when connected to a CBA750)
1)Connect your computer to the CradlePoint adapter with an Ethernet cable.
2)Open a browser window and type http://192.168.0.1 in the address bar. Press enter/return.
3)When prompted for your password, type the six characters of your MAC address found on the adapter product label.
4)Select TOOLS on the top navigation bar, then FIRMWARE in the left menu.
5)Find MANUALLY UPGRADE FIRMWARE and click the BROWSE button.
6)Select the firmware file you saved to your desktop and click OPEN.
7)Click the UPLOAD button. Wait a moment while your firmware is updated and the product reboots.
5
WARRANTY INFORMATION
CradlePoint, Inc. warrants this product against defects in materials and workmanship to the original purchase (or the first purchaser in the case of resale by an authorized distributor) for a period of one
(1)year from the date of shipment. This warranty is limited to a repair or replacement of the product, at CradlePoint’s discretion.
Within thirty (30) days of receipt should the product fail for any reason other than damage due to customer negligence, purchaser may return the product to the point of purchase for a full refund of the purchase price.
If the purchaser wishes to upgrade or convert to another CradlePoint, Inc. product within the thirty (30) day period, purchaser may return the product and apply the full purchase price toward the purchase of the other product. Any other return will be subject to CradlePoint, Inc.’s existing return policy.
REGULATORY STATEMENTS
FEDERAL COMMUNICATION COMMISSION INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equip- ment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio / television technician for help.
FCC Caution: Any changes or modifications not expressly approved by CradlePoint, Inc. could void the user’s authority to operate the product.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
6 | 7 |
IMPORTANT NOTE:
FCC RADIATION EXPOSURE STATEMENT
This equipment compiles with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
This transmitter must not be
Due to the essentially high output power nature of WiMAX device, use of this device with other trans- mitters at the same time may exceed the FCC RF exposure limit and such usage must be prohibited (unless such
8