Notes on the disc magazine
~SPECIFICATIONS
Compact disc changar
●Be sure to place a disc on the disc tray with the label side up. If a disc is not set properly, it may cause damage to the unit.
Disc magazine
a
● The disc tray may be taken off from the magazine |
if you pull the tray forcibly. If the tray is taken |
out, put it back into the magazine as illustrated. |
System
Frequency response Wow and flutter Signal to noise ratio outputs
Operating temperature
Dimensions
Weight
Power requirement
WA converter
Sampling rate Disc size
Supplied accessories
Compact disc digital audio system
5 Hz – 20 kHz
Below measurable limit
91 dB or more
Line output (for changer connector only)
254 x83x 173 mm (w/h/d)
(10 X3 ‘/, x 6 7/8 in.)
2.1kg
(4.62 Ibs.)
12 V DC car battery (negative ground)
1 bit DAC, 8 times over sampling
44.1kHz 120 mm
Disc magazine (1) Mounting kit (1 set) Connecting cable (5 m) (16.4 ft.) (1)
Be sure that both ends of the | tray are aligned to |
the grooves of the magazine | correctly. |
Design and specifications are subject to change without notice.
~Groove
●Be sure all the trays are set in the magazine when using the unit.
ENGLISH10