Aztech Systems DSL600E(C) user manual Configuring Using Setup Utility, Connect to the Internet

QUICK INSTALLATION GUIDE

Version 1.0

Aztech DSL600E(C)

Ethernet Modem

Minimum System Requirements

-Windows 98SE/ ME/ 2000/ XP

-MAC 9.x to 10.x

-64 MB RAM for Win 98 SE/ ME

-128 MB RAM for Win XP/ 2000

-64 MB or 128 MB RAM for Mac

-4 x CDROM Drive

-Ethernet Port (LAN Card)

Package Contents

1.1 x DSL600E(C) Ethernet Modem

2.Quick Installation Guide

3.User Manual (Found in CD)

4.Utility CD

5.1 x RJ-45 Straight Cable

6.1 x Telephone Cable ( RJ-11)

7.1x Power Adaptor (9V)

8.2 x POTS Splitter

For Technical Support	Support Hotline Hours
Please contact	Mon-Fri, 9am to 6pm
Aztech Systems Ltd	(Except public holidays)
support@aztech.com
Tel: 6749-2062

Step1 : Hardware Setup

1a Connect the power adapter to the power socket and the other end to the DC 9V jack of the DSL Router. Switch on both POWER adapter and the DSL MODEM.

DSL MODEM

	Power Cable
		DC 9V JACK	POWER SWITCH
Power Adapter

1b Connect one end of the telephone line to the modem labeled ADSL and the other end to the pots splitter labeled MODEM (optional) to connect a physical telephone, use another telephone line connect from the telephone to the pots splitter labeled PHONE.

CONNECT TO WALL SOCKET

POTS

SPLITTER

FOR WINDOWS USERS:

Important

Before you run the utility CD, please make sure that PC’s Network Card TCP/IP Properties and the Internet browser proxy is set accordingly. It is also assumed that the computer/ notebook has the network card already installed.

(Note: Settings for TCP/IP may be optional as the DSL Modem has a built-in function that allows the user who has a Static IP Address on the network card to access either the DSL Modem configuration page or surf web)

			WALL SOCKET
(OPTIONAL)
	TELEPHONE
	LINE
			DSL MODEM
		DSL JACK
TELEPHONE

Note:

1a. Configure TCP/IP settings for Win 98SE/Me

i)Windows Desktop -> right click Network Neighborhood for Win98SE / Network Places for Win ME -> Properties

ii)“Network” window -> click the Configuration tab -> scroll down to select and double click TCP/IP xxx (xxx refers refers to the model of the Ethernet Network Card connected to the DSL600E(C))

iii) “TCP/IP Properties” window -> select IP Address tab ->Select

Obtain an IP address automatically -> click DNS Configuration tab -> click Disable DNS -> Click OK

1b. Configure TCP/IP settings for Windows 2K/XP

i)Windows Desktop-> right click on Network Place icon, scroll down to select Properties

ii)“Network & Dial-Up Connection” window -> click Local Area Connection -> scroll down to select and double click

Internet Protocol TCP/IP

iii)“Internet Protocol (TCP/IP) Properties” ->select Obtain an

IP address automatically -> select Obtain DNS server address automatically -> click OK

2. Settings for Internet Browser Proxy:

i)Windows Desktop-> right click on Internet Explorer (IE) icon, scroll down to select Properties

ii)“Internet Properties” window -> click Connections tab -> Select Never dial a connection -> click LAN Settings …

iii)“Local Area Network (LAN) Settings “window ->remove the tick for the option for the Automatic configuration -> remove the tick for the option box for Proxy Server -> click OK -> click again to exit from “Internet Properties” window

3. For Singnet Filtering Service User (e.g. Family On-line)

i)Windows Desktop -> right click Internet Explorer (IE) -> click

Properties

ii)“Internet Properties” window -> click Connections tab Select Never dial a connection -> click LAN Settings kkdk

iii)Click to put a tick for Automatically detect settings

iv)Click to put a tick for “Use a proxy server for your LAN ...” -Type filter.singnet.com.sg in “Address” field ->

Type 8080 in “Port” -> click Advanced

-Proxy Settings window - > click to put a tick for “Use the Same Proxy Server for all protocols”

-Type 192.168.1.1 in the space provided under “Exceptions”. Click OK to exit “Proxy Setting” -> click OK

to exit “LAN Settings” -> click OK again to exit “Internet Properties”

The picture illustrates the connection t o a single telephone or fax machine. If you have another telephone or fax machine connected to other telephone wall socket (sharing the same line), please attach another POTS Splitter to telephone wall socket to prevent DSL signal from getting disconnected while surfing.

1c Connect one end of the Ethernet cable to the Ethernet port of t he computer and the other end to the ETHERNET Port of the DSL Modem.

ADSL MODEM

ETHERNET

CABLE

ETHERNET PORT

COMPUTER

Step2 : Configuring Using Setup Utility

2a FOR WINDOWS 98SE/ME/XP/2000 USERS	2b	Setup Wizard will start to check and configure
		the PC and DSL Router. In event the Wizard
IMPORTANT: Insert the Utility CD into the CD-ROM. The utility		prompts error, please follow the guide to rectify
		the problem.
will auto-run and display the main menu. Select Setup Wizard
button to proceed.
(Note: If doesn’t auto-run, then go to the CD-ROM
drive and execute the Setup.exe)
FIREWALL REMINDERS:
If your computer is installed with a firewall, it might prompt that
the setup launcher is trying to access the internet, just click on
Allow or Grant Access to proceed with setup. If the firewall
does not give you the prompt and utility informed you that your
computer is with a firewall, exit the utility and try disabling the
firewall rerun the utility CD. Enable the firewall after completing
the setup.

2c After checking, it will prompt you to enter Username and Password to setup the Internet Connection.

Step3 : Connect to the Internet

3a Enter your Username and Password given by the 3C	It will show info that the internet connection was
ISP. Depending on the service where you	successfully established. You may click on the
subscribed, you need to include the suffix	cube to start surfing or click EXIT to exit the utility
“@singnet” or “@singnet1500” or
“@singnetbusiness” after the username. Click
CONTINUE to proceed.

3b Upon successful connection to the Internet, it will display a summary of the settings, you may save or print for future reference. Click CONTINUE to proceed