Manually Configuring your Modem-Router
Click Add or Edit to
display the following page
and add a new static route to the list.
Parameter | Description |
Index | Displays the number of the route. |
Network | Enter the IP address of the remote computer for |
Address | which to set a static route. |
Subnet Mask | Enter the subnet mask of the remote network for |
| which to set a static route. |
Gateway | Enter the WAN IP address of the gateway to the |
| remote network. |
Manually Configuring your Modem-Router
RIP Parameter
The device supports Routing Information Protocol (RIP) v1 and v2 to dynamically exchange routing information with adjacent
| Description |
RIP mode | Globally enables or disables RIP. |
Auto summary | If Auto summary is disabled, then RIP packets will |
| include |
| works connected to the ADSL |
| If enabled, this |
| summarized to one piece of information covering |
| all |
Interface | The WAN interface to be configured. |
Operation | Disable: RIP disabled on this interface. |
Mode | Enable: RIP enabled on this interface. |
| |
| Silent: Listens for route broadcasts and updates |
| its route table. It does not participate in sending |
| route broadcasts. |
Version | Sets the RIP version to use on this interface. |
Poison Reverse A method for preventing loops that would cause endless retransmission of data traffic.
1
2
3
4
5
7 | section |
6 |
|
30 | 31 |