Security Setttings, Setting WEP | Corega CG-WLAPGMN instruction

WLAPGMN User Manual

	Beacon Interval	Default is [100], recommanded don't change it.
	(20-1000)	Default is [100], recommanded don't change it.
	(20-1000)
	DTIM (1-255)	Default is [1], recommand don't change it.
	Fragmentation	Enter even numbers.
	Length (256~2346)	Default is [2346], recommanded don't change it.
	RTS Length	Default is [2346], recommanded don't change it.
	(256~2346)	Default is [2346], recommanded don't change it.
	(256~2346)
	Transmit Power	Default is [full].
		If your Wireless LAN Card supports Super G Mode transmit
	Super Mode	rate.You can use this function to increase wireless through-
		put. Default is [Disabled].
	Radio Wave	Default is [On].
	eXtended Range	Default is [Disabled].

*Note: If any setting has been changed, you have to click [Reboot]- >[Restart] to save the changes.

<Security Setttings>

A. Setting WEP

1.Click[Advanced]->[Conﬁguration]->[Security Settings]->select [Shared Key] from [Authentication] tab->setting [Key Table], once conﬁgure completed, click [Apply].