Installation and User Guide
Creating a Dial-Up Connection for Macintosh
Use the following procedure to create your DSL
Dial-Up Configuration (Macintosh)
1.The USB cable should NOT be connected to the computer.
2.From your desktop, click the Apple menu icon, select the Control Panels folder, scroll down and open the Westell ADSL Setup folder.
Figure 65
3.Verify that the Configuration tab shows the VPI/VCI default values below. Do not change these unless instructed to do so by your service provider.
Modulation: | Multimode |
VPI: | 0 |
VCI: | 38 |
Encapsulation Mode: | |
ATM Mode: | PPPoA |
4.Click OK and exit the Modem Setup window.
5.Connect your modem as instructed in the following section.
PN | 38 |