Multi-Link ACP-300 specifications To Read Values from Memory, To Write Programs to Memory

Page 6

TO READ VALUES FROM MEMORY

To read all values, press 99 on your telephone key pad. To read the value of a single register, press * and the two-digit register number.

TO WRITE PROGRAMS TO MEMORY

Press 80 on your telephone key pad. This should always be done when you are satisfied with the information you have programmed.

TO EXIT PROGRAMMING MODE

Press 90 on your telephone key pad.

IMPORTANT: The ACP MUST be the first device on the phone to insure accurate routing. In a rollover sequence, install the ACP on the last line of rollover.

Note: Device port #2 is the default fax port (can be used as a modem port).

ACP SERIES 2.0 TECHNICAL SPECIFICATIONS

Model Number ACP‐300; ACP‐500; ACP‐900

Device Interface

Input Power Requirements

Battery: ‐38 Volts DC to all ports

Off‐Hook Detection: 8‐150 mA

At AC Transformer: 100‐240 Volts AC , 50‐60 Hz

Ring Generator Frequency: 33 Hz

At Power Jack on ACP: 12‐15 Volts DC (Center pin positive)

 

Grounded power supply recommended

Waveform: Sinusoidal

Power Consumption: (12VDC Input) 4 Watts

Following values are with 12VDC input

Power Consumption at standby: (12VDC Input) ≈ 2.5 Watts

(Values increase with 14/15 VDC input)

Ringing No Load: Approximately 105 Volts AC

CO Interface

Ringing 8K Ohm Imp. (REN1.0): Approx 90 Volts AC

Ringing 4K Ohm Imp. (REN2.0): Approx 78 Volts AC

Ringer Equivalence Number: 1.1B

Ringing 2.7K Ohm Imp. (REN3.0): Approx 68 Volts AC

Input Ring Detection: 50‐150 VAC, 15‐68 Hz

 

Physical: 6.3" W x 9.5" D x 1.4" H, 1 lb

Warranty: 2 Year Limited

FCC Registration# GK7USA‐73200‐KX‐N

Operating Temperature: ‐20°F to 120°F

 

Toll Free Sales and Tech Support 866.337.0965

International Sales and Tech Support 217.337.0965

techsupport@faxswitch.com www.faxswitch.com

Page 5 Page 6
Image 6
Page 5 Page 6
Contents Programming Manual ACP General OperationRegister 01 Mode Flags ACP Program RegistersRegister 02 Cadence On Time Register 05 Night Watch Mode Trip RingsRegister 06 Night Watch Mode Rings Register 03- Cadence Off TimeRegister 13 Security Access Code for Device Port Register 11 Security Access Code for Device PortRegister 12 Security Access Code for Device Port Register 14 Security Access Code for Device PortTo Enter Programming Mode To Reset ALL Register Values to Factory PresetTo Write Programs to Memory To Exit Programming ModeTo Read Values from Memory Press 90 on your telephone key pad

ACP-300 specifications

The Multi-Link ACP-300 is an advanced communication solution specifically designed to meet the dynamic needs of businesses in today’s fast-paced digital landscape. This robust device serves as a versatile platform that integrates multiple communication and connectivity features, making it an essential tool for organizations looking to enhance their operational efficiency.

One of the standout features of the ACP-300 is its multi-link capability, which allows simultaneous connections across various networks. This ensures that organizations can maintain constant communication without interruptions, even during peak usage periods. The device supports various communication protocols, providing seamless integration with existing systems. Its ability to switch between Wi-Fi, cellular, and wired connections ensures connectivity reliability, which is crucial for mission-critical operations.

The ACP-300 is equipped with cutting-edge security technologies, including Advanced Encryption Standard (AES) and Secure Socket Layer (SSL) protocols. These security measures protect sensitive data and communication lines from unauthorized access, making it suitable for industries that prioritize data security, such as finance and healthcare. The device also features built-in firewall capabilities to further enhance network security.

In terms of hardware, the Multi-Link ACP-300 boasts a high-performance processor and ample memory, allowing it to handle multiple tasks simultaneously without lag. This high processing capability ensures that users can run various applications, deliver seamless video conferencing, and engage in real-time collaboration without experiencing delays or bottlenecks.

The ACP-300 is designed with user-friendliness in mind. Its intuitive interface allows for easy navigation, enabling users to configure settings and monitor device performance effortlessly. Additionally, the device is compatible with various operating systems, making it a flexible option for diverse IT environments.

Another notable characteristic of the Multi-Link ACP-300 is its scalability. Organizations can easily expand their network capabilities by integrating additional devices without significant upgrades or complex configurations. This adaptability is ideal for growing businesses that anticipate evolving connectivity demands.

In summary, the Multi-Link ACP-300 is a comprehensive communication device that combines multi-link connectivity, advanced security features, robust hardware performance, and user-friendly design. Its scalability further enhances its appeal, making it a vital tool for any organization seeking to improve their communication infrastructure in a secure and efficient manner.
Top Page Image Contents