Optional
interconnect can
be purchased
separately
i.Unpack the
ii.Remove the protective sheet from the acrylic front panel.
iii.Ensure the
iv.Using the spirit level located inside the CD well, check the
v.Connect the
vi.Connect the other end of the
vii.Connect the IEC end of the
Transporting/Moving the CD-77
Prior to any transportation/movement, ALWAYS replace the protective foam insert inside the CD well. Without this, the CD door sensor may be knocked out of position due to the heft of the CD door moving in transit.
IF the protective foam insert has been misplaced, use sellotape to rigidly hold the CD door open prior to transpor- tation.
14