1.7 Configuration
To use the UM100C, you should install the software included in the installation CD and configure the UM100C USB device. See the next section for more information on software installation and USB device configuration.
2. INSTALLATION AND SETUP FOR QUICKLINK MOBILE
This section will guide you through the installation and setup process for QuickLink Mobile. Before getting started, you should become familiar with the documentation that came with your USB Modem.
CD’s
1.If you purchased a USB Modem, there is only one CD that contains QuickLink Mobile and the USB Modem drivers.
Getting Started
To install QuickLink Mobile:
1.Turn on your computer then close all applications.
2.Insert the
3.If set up does not automatically start, click the Start button on the taskbar then choose Run. Type D:\Start (where D is the letter of your
4.Follow the steps in the next section.
*QuickLink Mobile software must be installed before you insert the USB Modem in to the computer for the first time. Only after the software has been installed can Windows successfully install and configure the USB Modem.
3