Fostex 8360 owner manual TCP/IP setting recorders initial setting

Page 5

TCP/IP setting (recorder's initial setting)

Make the settings in the "TCP/IP Setup?" menu which is added to the setup mode of the recorder so that the Model 8360 can be used as an FTP server.

1.Turn on the recorder's power.

2.Press the [SETUP] key to enter the setup mode.

3.Use the JOG dial to bring up the "TCP/IP Setup?" menu and press the [EXECUTE/YES] key.

The first time you enter the TCP/IP setup mode, the display shows the screen for selecting the ether mode on or off.

SETUP

flashing

SETUP

flashing

4.Use the JOG dial to select the screen from among those required for the TCP/IP setting.

SETUP

flashing

SETUP

flashing

SETUP

flashing

SETUP

flashing

SETUP

flashing

5

Image 5

Contents Ether card for the Model D2424 / D2424LV Table of ContentsFTP client applications Installing the ether cardIntroduction One to one connection Connecting to a personal computerConnection to an existing LAN TCP/IP setting recorders initial setting After entering the IP address, press the EXECUTE/YES key IP address setting Subnet mask settingUse the JOG dial to select on and press the EXECUTE/YES key Anonymous settingLogin name password setting After entering the login name, press the EXECUTE/YES key Ether mode settingEnter a password in the same manner as entering a password After entering the password, press the EXECUTE/YES keyTCP/IP setting Personal computer settingSetting for connection IP address 192Getting a file from the recorder Transferring filesCreates the CCC folder Putting files to the recorderAffect of Immunity on This Equipment Declaration of EC Directive