Safety Instructions

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER - SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

"WARNING"

"TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE,"

1.Read Instructions - All the safety and operating instructions should be read before the appliance is operated.

2.Retain Instructions - The safety and operating instructions should be retained for future reference.

3.Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to.

4.Follow Instructions - All operating and use instructions should be followed.

5.Water and Moisture - The appliance should not be used near water - for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, and the like.

6.Carts and Stands - The appliance should be used only with a cart or stand that is recommended by the manufacturer.

An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.

7.Wall or Ceiling Mounting - The appliance should be mounted to a wall or ceiling only as recommended by the manufacturer.

8.Ventilation - The appliance should be situated so that its location or position does not interfere with its proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation openings; or, placed in a built-in installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings.

9.Heat - The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat.

10.Power Sources - The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance.

11.Grounding or Polarization - The precautions that should be taken so that the grounding or polarization means of an appliance is not defeated.

CAUTION:

TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

ATTENTION:

P O U R E V I T E R L E S C H O C S E L E C T R I Q U E S , INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU' AU FOND.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

12. Power Cord Protection - Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.

13. Cleaning - The appliance should be cleaned only as recommended by the manufacturer.

14. Nonuse Periods - The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time.

15. Object and Liquid Entry - Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings.

16. Damage Requiring Service - The appliance should be serviced by qualified service personnel when:

A. The power supply cord or the plug has been damaged; or

B. Objects have fallen,or liquid has been spilled into the appliance; or

C. The appliance has been exposed to rain; or

D. The appliance does not appear to operate normally or exhibits a marked change in performance; or

E. The appliance has been dropped, or the enclosure damaged.

17. Servicing - The user should not attempt to service the appliance beyond that described in the operating instructions. All other servicing should be referred to qualified service personnel.

18. The appliance should be situated away from drops of water or spray of water.

19. Objects containing liquid such as vase must not be put on the appliance.

20. The appliance is not completely isolated from the power supply even if the power switch is at off position.

21. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.

22. Only use attachments/accessories specified by the manufacturer.

23. An appliance with a protective earth terminal should be connected to a mains outlet with a protective earth connection.

24. An appliance should be placed in a position where an AC plug / inlet can be easily pulled out by hand.

25. Main plug is used as the disconnection device. It shall remain readily operable and should not be obstructed during intended use. To be completely disconnected the apparatus from supply mains, the mains plug of the apparatus shall be disconnected from the mains socket outlet completely.

p-2

PM0.4 specifications

The Fostex PM0.4 is a highly regarded studio monitor that has been designed specifically for audio professionals and enthusiasts who demand accurate sound reproduction. Renowned for its compact size and excellent performance, the PM0.4 is an ideal choice for home studios, small recording spaces, and multimedia production environments.

One of the primary features of the PM0.4 is its bi-amped design, which utilizes a dedicated amplifier for both the woofer and the tweeter. This configuration allows for enhanced clarity and detail across the frequency spectrum, ensuring that every element of the audio mix is heard accurately. The woofer measures 4 inches and is constructed from polypropylene, providing a solid low-end response with minimal distortion. The 1-inch soft dome tweeter complements the low frequencies with smooth high frequencies, making the monitor capable of reproducing a frequency range from 60 Hz to 30 kHz.

In addition to its impressive frequency response, the PM0.4 incorporates advanced technologies to manage sound dispersion and reduce unwanted reflections. The monitor features a front-ported design, which allows for flexible placement in varied environments. This design helps to enhance the low-frequency response while minimizing boundary coupling effects that can occur in close proximity to walls. This makes the PM0.4 versatile and adaptable to any studio setup.

Another notable characteristic of the PM0.4 is its adjustable acoustic controls. The rear panel of the monitor features switches for tailoring the sound to suit the environment, including options for low-frequency roll-off and high-frequency adjustment. This flexibility enables users to optimize the monitors for their unique space, resulting in a more accurate audio experience.

The build quality of the PM0.4 is significant, as it features a robust MDF cabinet that helps to minimize resonance and provide a clean monitoring experience. The monitor is finished in a sleek black vinyl, ensuring both aesthetics and durability.

In conclusion, the Fostex PM0.4 offers an impressive combination of features and technologies tailored to audio professionals. With its bi-amped configuration, front-ported design, adjustable acoustic controls, and solid build, it is an ideal choice for anyone seeking reliable and accurate sound monitoring in a compact form factor.