Installation Guide
·Use the default settings for the Destination Location unless you have special requirements and an advanced understanding of PC configuration. (The Desti- nation Location dictates where the software is installed.)
·You must restart your PC before you can use the software. Click Finish to close the last screen of the wizard and to restart your PC.
On completion of this step, the Venturi software is installed and, after your PC reboots, you can proceed to configure the PC3320 card to use your account (if it was not
Card insertion and removal
Inserting the PC3320 card
To insert the PC3320 into a notebook:
1.Attach the antenna to the circular gold connector on the end of the PC3320 card. DO NOT FORCE.
2.With the picture label facing up, insert the PC3320 card into the slot.
When you insert the PC3320, the following should occur:
•If sound effects are enabled, the PC beeps.
•The PC Card icon appears in the status area, if it is not already displayed for another card, (and unless the feature has been disabled).
The PC3320 card is powered as soon as you insert it.
Removing the PC3320 card
To remove the PC3320 card:
1.Close Mobile Connection Manager if it is open.
2.Click the PC Card icon in the status area to display the option to stop the card.
3.Click “Stop CDMA 1X Parent” (Windows 98, 2000, or Me) or “Safely remove CDMA 1X Parent” (Windows XP).
4.If a dialog box appears notifying you that it is safe to remove the card, click OK.
5.Use the ejector to remove the PC3320 card from the slot. Do not pull the PC3320 card out by the antenna.
20 | 2130361 |