Sierra Wireless 2170042 manual Configuring Dynamic IP Domain Name

Page 7

IP Manager

Configuring Dynamic IP

Domain Name

To configure your AirLink modem to be addressed by name, the modem needs to have 4 elements configured. You can configure a second dynamic server as a backup, secondary, or alternate server. In AceManager, select Dynamic IP.

Note: eairlink.com server is still available, but Sierra Wireless recommends that customers use edns2server.

car54-2007 eairlink.com edns2.eairlink.com

eairlink.com

Figure 5: AceManager : Dynamic IP (Adresse IP dynamique)

*MODEMNAME: The name you want for the modem.

*DOMAIN: The domain name to be used by the modem.

*IPMANAGER1 and *IPMANAGER2: The IP address or domain name of the dynamic DNS server which is running IP Manager.

Note: To use the name here instead of the IP, you need to have DNS set up in your modem (page 9).

*IPMGRUPDATE1 and *IPMGRUPDATE2: How often, in minutes, you want the address sent to IP Manager. If this is set to zero, the modem will only send an update if the IP address changes (example, if your modem is reset or is assigned a different IP address).

*IPMGRKEY1 and *IPMGRKEY2: User defined password key which is used instead of the Sierra Wireless secret key when using an IP Manager server other than the one provided by Sierra Wireless.

 

 

 

 

 

 

 

7

 

 

 

 

 

2170042

 

 

 

Image 7
Contents IP Manager Reasons to contact the modem and/or the connected device Fully Qualified Domain Name Dynamic Names Connecting to your modem with AceManager Configuring Your ModemSoftware Required Software RecommendedOptional AceManager Connect Ethernet AceManager Dynamic IP Adresse IP dynamique Configuring Dynamic IP Domain NameEairlink.com Data Usage for IP Manager Server UpdatesConfiguring DNS DNS Using Names Instead IP addressesPPP-Peer IP Manager 2170042 Important Notice Safety and Hazards Limitation Liability Qualcomm 3G PatentsAirLink Solutions Copyright Trademarks Contact Information USA