Actiontec electronic 56K ISA Lite manual Windows 95 and Windows, Check System Resources

Page 32

Windows 95 and Windows 98

Step 1: Check System Resources.

In Control Panel double-click the System icon. Click the Device Manager tab. In the list of devices, double-click the Modems icon to show what modems are in- stalled. If there is no Modems icon, your modem did not install. If your modem is listed, check that there is no yellow exclamation mark or red “X” over the modem’s icon (If there is some alteration to this icon, go to Step 2.) If any other modems are listed, highlight the modem by clicking once on the icon next to the listed modem and then click Remove. Turn off your computer. Wait 5 seconds and turn your com- puter back on. Repeat Step 1.

Step 2: Check Modem Properties.

From the Device Manager tab within System Properties, double-click the Modems icon in the list of devices to show what modems are installed. Highlight your modem by clicking once on the icon and then click the Properties button. Read the “Device Status” under the General tab to see if the device is working properly. Check the Device Usage box and make sure “Disable in this hardware profile” is not selected. (Windows 95 OEM SR2 and Windows 98 only). Make a note of the COM port and IRQ the modem is using.

Errors reported in the Device Status box generally refer to conflicts. Click the Re- sources tab and read the “Conflicting Device List.” If a conflict is present, click to deselect “Use automatic Setting” and select a configuration that does not cause con- flicts. Manually change the address and IRQ settings if needed. (Refer to Windows 95 on-line help for detailed about how to change these settings.) Click OK. If there is no setting free of conflicts, turn to the section of this manual titled “Does Not Install.”

Step 3: Modem Diagnostics.

In Control Panel double-click the Modems icon. Your modem should be listed. If any other modem is also listed, click to select each of these other modems and then click the Remove button. Turn off your computer, wait 5 seconds and turn the power back on. Return to Control Panel and double click the Modems icon. Click the Diagnostics tab. Click the COM port designation next to your modem. Click More Info. You should see a dialog box like the following.

31

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Page Table of Contents Introduction Contacting Actiontec Customer SupportFor Windows 95 and Windows 98 Installations Do This FirstWindows 95 IRQ Resources Dialog Box COM2 Properties Dialog Box Windows 95 or 95A COM2 Disable Panel For Windows NT 4.0 Installation Devices WindowInstalling The Modem Hardware InstallationInstalling The Modem Connecting Devices To The Modem Connecting DevicesConfiguring Windows Page Page Configuring Windows 95 OEM SR2 FinishPage Page Page Next Page Page Page Page Page Page Configuring Windows NT Page Page Page Installing and Configuring Communications Software Modem’s Voice FeaturesTroubleshooting Windows 95 and Windows Check System ResourcesMore Info Panel Uninstalling the Modem Page Common Problems No Dialtone ErrorNothing Appears On The Screen When I Type Page FCC Part 68 Requirements Appendix B Communications RegulationsFCC Regulations Declaration of Conformity Canadian Department Of Communications Cdoc

56K ISA Lite specifications

The Actiontec electronic 56K ISA Lite modem is a pivotal technology that played an essential role in the evolution of internet connectivity, especially during the late 1990s and early 2000s. As a dial-up modem, it facilitated access to the internet at a time when broadband was not widely available. This device utilized the ISA (Industry Standard Architecture) bus, which was popular for connecting hardware components to the motherboard in personal computers.

One of the hallmark features of the Actiontec 56K ISA Lite is its compliance with the V.90 standard, enabling it to achieve download speeds of up to 56 Kbps. This capability marked a significant improvement over earlier modems that typically operated at lower speeds. The modem's design focused on providing a reliable and stable connection, which was crucial for homes and offices relying on dial-up services.

Another key technology behind the Actiontec 56K ISA Lite is its use of a data compression technique called V.42bis. This technology optimizes the transfer of data, allowing it to reduce file sizes and enhance the efficiency of internet connections. Coupled with error correction capabilities, V.42bis helps in ensuring that data transmitted over the phone lines remains accurate and intact, further improving the user's experience.

In terms of characteristics, the ISA Lite modem was relatively easy to install and integrate into existing computer systems of the time. It supported a straightforward plug-and-play functionality, making it accessible to users with varying levels of technical know-how. The modem also came equipped with diagnostic LEDs that provided real-time feedback on its operation, such as connection status and data transmission activity.

The Actiontec electronic 56K ISA Lite was built with a compact design, fitting well into the ISA slots of most PCs. It was compatible with various operating systems, allowing users to connect to the internet regardless of the software they were using.

Though now considered outdated due to the advent of high-speed broadband connections, the Actiontec 56K ISA Lite modem represents a significant milestone in telecommunications history. Its features and technologies helped pave the way for the internet accessibility that we enjoy today, shaping the digital landscape for future generations.
Top Page Image Contents