Installation Instructions

WARNING! DO NOT MOUNT THE UNIT YET!

This unit is a cellular communications device.

THE ANTENNA MUST NOT BE INSTALLED IN THE BASEMENT!

1.Connect the power.

Connect the Telguard TG-9 to the 12v DC power output from the alarm panel or to a 9-15v DC (250 mA minimum) power supply. Ensure that the LEDs come on.

Important: The 2.5mm port on the side of the TG-9 is for programming and diagnostics only. It is not a power input and installer shall not insert any type of jack or other device into this port.

2.Check the signal strength.

Look at LED 1 and compare it to the following chart.

Green Solid	Good Signal Strength
Green Flashing	Acceptable Signal Strength
Yellow Flashing	Weak Signal Strength
Red	No Signal Strength

If the light is not green flashing or green solid, move the unit or antenna around until a green flashing or green solid is achieved.

3.Activate the unit.

Short Trip Input 6 (the bottom two terminals). LED 2 should go from RED to SOLID GREEN. This indicates that the unit is registered and active. This may require up to 3 minutes.

Note: If using Bell input, Bell must be connected per Table 1 on page 5 before activating. Make sure there are no Bell alarms in progress before activating.

If a FLASHING RED appears on LED 2, the unit has failed registration. This usually indicates that the Activation Form has not been completed. If this occurs, call Telular Technical Support at 800-229-2326.

4.Connect the trip inputs.

The trip inputs on the TG-9 should be connected according to the TG-9 Operation Profile selected for the unit. (Consult the installation diagram on the opposite page.) All zone inputs require an E.O.L. resistor (supplied).

Note: If zone 1 is programmed as a bell input, do not connect E.O.L. resistor.

5.Send test signals.

Trip zones on the system, and confirm that signals are received at the central station.

6.Connect the relay output to the alarm panel. (Optional)

The STC relay output is a Normally Closed (N.C.) contact. The zone on the panel should be programmed as a 24-Hour Supervisory Zone.

7.Permanently mount the Telguard TG-9

56037002

- 3 -

TG-9 specifications

The Telular TG-9 is a cutting-edge communication device that caters to various sectors, including remote monitoring, telematics, and industrial automation. Designed for versatility, the TG-9 excels in providing reliable connectivity while ensuring ease of integration into numerous applications.

One of the key features of the Telular TG-9 is its robust GSM (Global System for Mobile Communications) compatibility. Utilizing GSM technology allows the TG-9 to leverage existing cellular networks, granting users the flexibility to deploy the device in areas lacking traditional wired infrastructure. This enhances mobility and accessibility, making it a preferred choice for businesses seeking real-time data transmission and remote access capabilities.

Another standout characteristic is the device's dual-band support, operating on both 850 MHz and 1900 MHz frequencies. This feature ensures optimal network coverage and reliability, enabling uninterrupted communication in diverse environments. The device is engineered to perform consistently, whether in urban centers or rural landscapes, making it suitable for various industries such as agriculture, logistics, and utilities.

The Telular TG-9 is also equipped with advanced power management technologies, allowing it to efficiently manage energy consumption. This is particularly beneficial for applications powered by battery sources, extending the operational life and reducing maintenance costs. Furthermore, the device supports a wide temperature range, ensuring performance in extreme weather conditions, which is vital for outdoor deployments.

Integration capabilities are another key feature of the TG-9. It supports a range of communication protocols, facilitating seamless connectivity with existing systems. This ease of integration allows for adaptability in deploying various applications, from asset tracking and fleet management to remote environmental monitoring.

Security is a paramount consideration in the design of the TG-9. The device includes features to safeguard data transmission, crucial for industries that handle sensitive information. With built-in encryption and secure connectivity options, the TG-9 provides peace of mind to users who prioritize data integrity.

In summary, the Telular TG-9 stands out with its GSM compatibility, dual-band operation, advanced power management, and robust security features. With its adaptability and reliability, the TG-9 is an ideal solution for businesses looking to harness the power of remote communication technology to optimize operations and enhance decision-making processes.