Sagem F@ST 800 manual Front panel LEDs, Adsl LED blinking

Page 54

Appendix A - SAGEM F@st™ 800 troubleshooting

This appendix is intended to help the user resolve the various fault conditions that may be encountered when installing or using the SAGEM F@st 800. The LEDs on the front of the modem are provided for this purpose.

A.1 Front panel LEDs

The front panel of the SAGEM F@st 800 modem has two supervision LEDs:

Marking

ADSL

PWR

 

 

 

Assignment

Presence of WAN access

Presence of power + USB

 

 

 

Color

Green

Green

 

 

 

Continuously

ADSL connection set up

SAGEM F@st 800 powered

on

 

up

Off

ADSL connection not set up

SAGEM F@st 800 not

 

 

powered up or not detected

 

 

on the USB bus of your

 

 

computer (see section A.1.2)

Flashing

ADSL connection being set up

(see section A.1.1)

_

A.1.1 "ADSL" LED blinking

This indicates that the SAGEM F@st™ 800 is attempting to connect to the remote connection DSLAM. The indicator remains in this state while the modem is not connected to an active ADSL line.

ADSL connection takes less than a minute after connection to the ADSL line.

!If, after the connection time, the LED is still flashing:

Check that the SAGEM F@st™ 800 is connected correctly to the ADSL line (either directly or via a splitter or microfilter).

Check that the miniature RJ11 connector pins are not dirty or damaged.

Check with your Internet Access Provider (IAP) that ADSL mode is definitely activated on the telephone line that you want to use.

Disconnect and then reconnect the USB cable.

Restart your computer (PC or Mac).

Check with your Internet Access Provider (IAP) that the ADSL link provided on this line is compliant with one of the three transmission standards supported by the SAGEM F@st™ 800:

-ANSI T1.413 Issue 2,

-G.992.1 (G.dmt),

-G.992.2 (G.lite).

SAGEM F@st™ 800 (PPP) User Guide - 288021372-05

Page A-2Reproduction and communication prohibited without the written permission of E

Image 54
Contents User Guide 288021372-05Page Contents Appendix B Safety instructions Installation in Mac OSAppendix a Sagem F@st 800 troubleshooting Appendix C Technical SpecificationsIntroduction Introduction Overview Package System requirements Introduction Connecting the Sagem F@stTM Connecting the modem Connecting analog terminals Configuration with input splitterConfiguration with distributed splitters microfilters Connecting the Sagem F@stTM Installation in Microsoft Windows Installing the Sagem F@stTM Click Install the modemInstallation in Microsoft Windows Uninstallation Installation in Microsoft Windows Disconnecting from the Internet Device Manager screen appears Diagnostics tools Version information Diagnostics icon Uninstalling the Sagem F@stTM Uninstallation is finishedInstallation in Microsoft Windows Installation in Mac OS 8.6 or Mac OS Installation in Mac OS 8.6 or Mac OS MacOS MacOS X 10.1Uninstallation procedure is described in section Select Open Remote Access Disconnecting from the Internet Click Open Remote Access Via a PPP server Diagnostics tools Adsl synchronization in progress Operation screenAdsl status area Modem is operationalAdsl performance area Statistics screen Adsl areaATM area Multi Standard Default value Configuration screenConfiguration area Packets areaVersion information area Icon indicating the modem status At top left, select Uninstall from Installation in Mac OS 8.6 or Mac OS Installation in Mac OS Installation in Mac OS Then click Installation in Mac OS Installation in Mac OS Select Disconnect Installation in Mac OS Diagnostics tools Uninstalling the Sagem F@stTM Installation in Mac OS Appendix a Sagem F@st 800 troubleshooting Front panel LEDs Adsl LED blinkingAdsl and PWR LEDs off Adsl LED off and PWR LED onAdsl LED on steady and PWR LED on Appendix a Sagem F@st 800 troubleshooting Appendix B Safety instructions Safety instructions Environment Maintenance Power source Safety levelsCE declaration of conformity Appendix C Technical Specifications USB interface Equipment specificationsMechanical Adsl interfaceEnvironmental specifications Mechanical environmentPhysical/chemical environment Encapsulation protocols Software specificationsPC and Mac compatibility MacAppendix D Default configuration Encapsulation PPPoA Vcmux MultimodeAppendix E Glossary RJ11 PPPoAPPPoE RJ45Vendor ID Virtual Channel IdentifierEncapsulation without header Virtual PathAppendix E Glossary Page ENetworks and Telecommunications Division

F@ST 800 specifications

The Sagem F@ST 800 is a robust DSL (Digital Subscriber Line) modem designed to deliver reliable high-speed internet connectivity for both residential and small business users. Renowned for its user-friendly interface and advanced technology, the F@ST 800 stands out in the competitive landscape of home networking devices.

One of the primary features of the Sagem F@ST 800 is its compatibility with ADSL (Asymmetric Digital Subscriber Line) and ADSL2+ technologies. This compatibility allows users to achieve download speeds that can reach up to 24 Mbps, depending on the quality of the telephone line and the distance from the service provider's exchange. This capability makes the F@ST 800 an attractive option for activities requiring high bandwidth, such as streaming HD videos, online gaming, and large file downloads.

In addition to its high-speed capabilities, the F@ST 800 comes equipped with a built-in Ethernet switch, making it easy to connect multiple devices directly to the modem. This feature is particularly beneficial for homes or small offices where various devices, such as computers, printers, and smart TVs, require a stable internet connection. Moreover, the modem typically includes several LAN ports, supporting wired connections for devices that require reliable and fast internet access.

The Sagem F@ST 800 also incorporates a wireless access point, allowing users to create a Wi-Fi network. With support for the latest wireless standards, it provides secure and speedy wireless connections across the home or office. Users can enjoy the convenience of connecting their smartphones, tablets, and laptops without the need for physical cables, enhancing mobility and flexibility.

Security is paramount in connecting to the internet, and the F@ST 800 addresses this concern with advanced encryption protocols. The device supports WPA/WPA2 encryption, ensuring that data transmitted over the network remains secure and protected from unauthorized access.

Another significant aspect of the Sagem F@ST 800 is its easy-to-use graphical user interface, which simplifies network setup and management. Users can easily configure their network settings, manage connected devices, and monitor performance metrics through an intuitive web-based interface.

In summary, the Sagem F@ST 800 is a versatile and efficient modem that combines high-speed internet access, multiple connectivity options, and strong security features. Its dual capabilities of wired and wireless connections make it an ideal choice for users seeking a reliable internet solution that can adapt to their growing connectivity needs.