Land Pride
Shredder Assembly Instructions
Shredder Assembly Instructions
A detailed listing of parts for this accessory kit is provided on page 6. Use the list as a checklist to inventory parts received. Please contact your local Land Pride dealer for any missing hardware.
IMPORTANT: Read “Safety Information” on page 1 before installing shredder blades.
Refer to Figure 3:
1.Remove all three existing blade carrier assemblies from the gearbox output shafts (A & B). Keep flat washers C), slotted hex nuts (D) and cotter pins (E) for reuse.
Right Wing Shredder Assembly
Refer to Figure 3:
1.Attach right wing shredder assembly (#1) to gearbox output shaft (A) with existing washer (C) and slotted hex nut (D). Torqued slotted nut to 550 ft./lbs.
2.Install cotter pin (E) in the slotted nut with legs securely bent around the nut.
Clockwise Rotation |
25601 |
Right Wing Shredder Assembly
Figure 3
Center Deck & Left Wing Shredder Assy
Refer to Figure 4:
1.Attach center deck and left wing shredder assemblies (#2) to gearbox output shafts (B) with existing washer (C) and slotted hex nut (D). Torqued slotted nut to 550 ft./lbs.
2.Install cotter pin (E) in the slotted nut with legs securely bent around the nut.
Counterclockwise Rotation |
25601 |
Center Deck & Left Wing Shredder Assemblies
Figure 4
4 | Manual No. | ■ 8/20/07 |