General safety rules

WARNING. Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term “power tool” in all of the warnings listed below refers to your mains operated (corded) power tool or battery operated (cordless) power tool.

Save these instructions 1. Work area

a. Keep work area clean and well lit. Cluttered and dark areas invite accidents.

b. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

c. Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

2. Electrical safety

a. Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.

b. Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.

c. Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of electric shock.

d. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.

e. When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.

3. Personal safety

a. Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.

b. Use safety equipment. Always wear eye protection.

Safety equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.

c. Avoid accidental starting. Ensure the switch is in the off position before plugging in. Carrying power tools with your finger on the switch or plugging in power tools that have the switch on invites accidents.

d. Remove any adjusting key or wrench before turning

the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.

e. Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.

f. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.

g. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of these devices can reduce dust related hazards.

4. Power tool use and care

a. Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.

b. Do not use the power tool if the switch does not turn

it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.

SHS2400 specifications

The Global Machinery Company SHS2400 is a cutting-edge piece of equipment tailored for the modern industrial landscape. Designed with versatility in mind, the SHS2400 stands out for its ability to handle a wide range of tasks while maintaining peak operational efficiency.

One of the key features of the SHS2400 is its robust construction, built to withstand the rigors of heavy-duty environments. The chassis is made from high-quality steel, providing enhanced durability and resistance to wear and tear. Its compact design allows for ease of transport and maneuverability, making it suitable for various job sites, from large-scale construction projects to smaller workshops.

Incorporating advanced technologies, the SHS2400 is equipped with a state-of-the-art digital control interface. This user-friendly system enables operators to easily navigate through various settings and functions, allowing for precise adjustments to meet specific project requirements. The digital display provides real-time feedback on performance metrics, enhancing operational control.

The heart of the SHS2400 lies in its powerful hydraulic system, which ensures high efficiency and effectiveness in various applications. With an impressive lifting capacity, it can handle heavy loads with ease, making it ideal for lifting, loading, and material handling tasks. The hydraulic system is engineered for low maintenance, allowing for extended operational periods without significant downtime.

Another standout feature is the SHS2400’s energy efficiency. Designed with modern engineering principles, it minimizes fuel consumption while maximizing output. This not only reduces operational costs but also minimizes the environmental impact, aligning with global sustainability goals.

Safety is a top priority with the SHS2400. It is equipped with multiple safety features, including emergency stop buttons, overload protection, and enhanced visibility through well-placed lighting. These attributes make it a reliable choice for operators who prioritize safety in their work environment.

In conclusion, the Global Machinery Company SHS2400 is a powerful, versatile, and efficient machine that embodies the technological advancements of the modern industrial sector. With its robust construction, advanced controls, impressive hydraulic performance, energy efficiency, and safety features, the SHS2400 is an invaluable asset for a wide range of applications, setting a high standard in machinery performance and reliability.