ENG Electric UNIDISK SC PLAYER owner manual Audio Setup, Mix-Mono, For DVD-Videos

Page 20

English Setup Menus

Audio Setup

SPDIF Out (Digital outputs only)

Default setting: Off

If you are not using the UNIDISK SC’s digital audio outputs, set to Off.

If any of the UNIDISK SC’s digital outputs are connected to a Linn system controller, other external audio decoder or other device, set to Raw.

If you are recording to an external digital source (e.g. DAT player), set to LtRt PCM.

LPCM Out (Digital outputs only)

Default setting: LPCM 96K

If any of the UNIDISK SC’s digital outputs are connected to a Linn system controller, or any other processor which accepts a sampling rate of 96 kHz, set to LPCM 96K.

If the external processor does not accept a sampling rate of 96 kHz, set to LPCM 48K.

Notes:

Even when set to LPCM 96K some discs will only output at the lower rate of 48 kHz.

DVD-Video discs with CSS copy protection and have been recorded at a sample rate of 96 kHz will always output audio through the digital outputs at 48 kHz. DVD-Video discs without CSS copy protection will output at up to 96 kHz.

Audio signals from Super Audio CDs and DVD-Audio discs are output as analogue only. There is no output for these disc types from the digital connectors.

Dual Mono (Analogue and digital outputs)

Default setting: Stereo

This option is for DVD-Videos which have separate audio tracks for the left and right channels.

To hear only the left channel, set to L-Mono.

To hear only the right channel, set to R-Mono.

To combine the discrete left and right channels, set to

Mix-Mono.

For normal use (i.e. most discs), set to Stereo.

UNIDISK SC PLAYER

Midnight Movie (Analogue and digital outputs)

Default setting: Off

This option allows you to add compression to the Dolby Digital audio signal on DVD-Videos. Adding compression reduces sudden increases in volume, such as the sound of an explosion.

To add compression, set to On.

Dolby PL (Pro Logic) (Analogue outputs only)

Default setting: Auto

Dolby Pro Logic decoding is used by the UNIDISK SC to convert stereo signals to more than two channels in order to enhance the audio signal. Select the setting you wish to use with your source material.

For DVD-Videos

Off – Stereo tracks on a disc will play as stereo.

On – Stereo tracks on a disc can be played as stereo or decoded to up to five channels (depending on the number of speakers in your system and the audio mode selected – see Surround Sound and Audio Modes chapter).

Auto – The unit will read the code embedded on the disc and will automatically switch Pro Logic on or off.

For other stereo sources (CDs and auxiliary digital or analogue stereo sources)

Off – Stereo sources will always be output as stereo.

On or Auto – Stereo sources can be played as stereo or decoded to up to five channels (if permitted by the audio stream and dependent on the number of speakers in your system and the audio mode selected – see Surround Sound and Audio Modes chapter).

Owner’s Manual

14

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Unidisk SC Player Page Important Safety Instructions Mains PlugsFCC notice English Important Safety InformationCE Declaration of Conformity Copyright and Acknowledgements Contents Cleaning IntroductionIntroduction English Disc typesConnecting English ConnectingUnpacking Voltage selectionBack panel Scart version Connecting EnglishMains input Power switch Back panel Phono version Disc drawer Front panel display Front Panel and HandsetFront panel Handset modes English Front Panel and HandsetHandset Standby mode Setup MenusAbout the setup menus Video OutputTo exit from the setup menus To access the setup menusTo navigate the setup menus and make a selection General Setup Aspect RatioVideo Standard Ntsc TypeEnglish Setup Menus Speaker SetupSurround SubwooferFront Posn. position Centre Posn. positionProgressive Scan Setup Hdmi SetupVideo Source Setup EdidFor DVD-Videos Audio SetupMix-Mono Dolby PL II Cntl Control Preferences Page Front panel symbols Playing DiscsEnglish Playing Discs First of allTo remove a disc using the handset Basic operationTo play a disc To pause a discPlaying Super Audio CDs Direct title/group selectionDirect chapter/track selection Direct track selectionTo replay the current chapter/track To play a particular trackLocating a particular point on a disc Fast search forwards and backwardsFast scan forwards and backwards Slow search forwards and backwardsUsing program modes to control playback To cancel repeat disc modeDirect time selection Repeat discRepeat chapter/track Repeat sectionShuffle program Include programUsing DVD-Video and DVD-Audio menus Exclude programZoom and pan Language or audio stream selectionAngle selection Additional information on Video CDs and Super VCDs Additional file formatsTo turn PBC on or off To play/view such filesTo cancel replay file mode Replay fileTo replay an MP3 file To shuffle the order in which files in a folder playUsing Dolby Pro Logic II with CDs Audio mode Speakers usedSurround Sound and Audio Modes Surround Sound and Audio Modes EnglishVolume and muting Trim adjustmentPre-amplifier English Pre-amplifierAuxiliary source selection Balance adjustmentPre-amplifier English Changing the user options’ settings User OptionsEnglish User Options Table of user optionsDisc Enabled User OptionsTechnical Specification English Technical SpecificationGuarantee and Service Technical support and informationLinn Products Limited Linn Incorporated

UNIDISK SC PLAYER specifications

The ENG Electric UNIDISK SC PLAYER is a cutting-edge audio and video playback device designed for audiophiles and enthusiasts who demand superior quality and versatility in their home entertainment systems. This player stands out with its distinctive unidisk technology, allowing it to handle multiple disc formats, including CD, DVD, and even SACD. Users can enjoy a wide range of media without the hassle of switching devices or compromising on quality.

One of the key features of the UNIDISK SC PLAYER is its advanced digital-to-analog converter (DAC), which is engineered to deliver exceptional sound clarity and fidelity. The state-of-the-art DAC provides a rich and immersive audio experience, capturing every detail in the music and offering a dynamic range that brings recordings to life. With support for high-resolution audio formats, listeners can enjoy their favorite albums in ways that were previously unattainable.

In addition to its audio capabilities, the UNIDISK SC PLAYER is equipped with impressive video playback features. The device supports various video formats, and its upscaling technology enhances lower resolution videos to near-HD quality, ensuring a crisp and vibrant visual experience. This makes it an ideal choice for home theater setups, where both audio and visual performance are paramount.

The player also boasts an intuitive user interface, making it easy to navigate through playlists, settings, and various formats. Remote control functionality offers additional convenience, allowing users to operate the device from the comfort of their seat.

Connectivity is another strong suit of the UNIDISK SC PLAYER. It features multiple output options, including HDMI, optical, and coaxial connections, allowing seamless integration with a range of audio and video systems. Furthermore, the player is designed to minimize signal degradation, ensuring high-quality transmission.

Built with robust construction, the UNIDISK SC PLAYER not only promises durability but also aesthetics. Its sleek design complements modern home entertainment setups, making it a valuable addition to any system.

In conclusion, the ENG Electric UNIDISK SC PLAYER is a multifaceted audio and video playback device that caters to the desires of serious music and film lovers. With its unidisk technology, advanced sound processing, exceptional video quality, and user-friendly interface, it represents a significant advancement in home entertainment solutions.
Top Page Image Contents