3.DO NOT PULL ON PAPER. Damage to the drive system could occur.
4.Overload Protection:
This unit has an overload protection function which serves to protect the motor. When continuous shredding is conducted for a long period of time, and the unit is overloaded with paper, the operation will automatically stop. When shredding is stopped by the overload protection function, first unplug the unit from the wall, then allow the unit to stand for about 25 minutes before using it again.
5.If the machine jams in reverse, turn off the machine, unplug the unit and cut all excess paper off the top and bottom of the machine before repeating the
6.Shred smaller quantities. See Specifications.
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS HEREBY LIMITED IN DURATION TO THE APPROPRIATE WARRANTY PERIOD SET FORTH ABOVE. In no event shall Fellowes be liable for any consequential or incidental damages attributable to this product. This warranty gives you specific legal rights. You may have other legal rights that vary from state to state.
For more detail or to obtain service under this warranty, please contact Fellowes Customer Service at
For specific instructions on obtaining service under this warranty on machines purchased outside the USA, contact
the appropriate location listed in the Contact for Service section of this instruction manual.
Warrantor: Fellowes Manufacturing Company.
Specifications
Entry Width | 9”/230mm |
Shred Size | 5/32 x 2”/3.9 x 50mm |
Sheet Capacity | 6 |
20# (74gsm)/DIN A4, 70 g/m2 |
|
Recommended Daily Use | |
Shredding Speed | 10 fpm/3.0mpm |
Power Source | 120V/60Hz |
| |
|
|
Dimensions | |
HxWxD | 450 x 317 x 203mm |
Important Note
This paper shredder is not intended to shred high volumes of paper. Please refer to the specifications for the recommended daily usage and sheet capacity of this shredder. Please note that if the paper is wider than the entry, and you fold it to fit, the paper thickness increases and the recommended capacity may be exceeded.
Limited Warranty
Fellowes Manufacturing Company warrants the cutting cylinders of all Fellowes shredders to be free from defects in material and workmanship for five years from the date of purchase by the original consumer. Fellowes warrants all other parts of the machine to be free of defects in material and workmanship for one year from the date of purchase by the original consumer. If any part is found to be defective during the warranty period, your sole and exclusive remedy will be repair or replacement, at Fellowes’ option and expense, of the defective part.
This warranty does not apply in cases of abuse, mishandling or unauthorized repair. ANY IMPLIED WARRANTY, INCLUDING THAT
Declaration of Conformity
Fellowes Manufacturing Company
Doncaster Road, Kirk Sandall
Doncaster, South Yorkshire, DN31H England
declares that the product
Models P600, P600C, S60C,
conforms with the requirements of the Low Voltage Directive (73/23 EEC) and the Electromagnetic Compatibility Directive (89/336 EEC) and the following harmonized European Normes (EN Standards) and IEC Standards.
Safety: EN60950 ‘Information Technology Equipment’ EMC:
|
| Performance |
Standard | Severity Level | Criteria |
EN | Category I device | NA |
EN | Household limits | NA |
+A1:1997 |
|
|
EN | Class A | NA |
EN | Section 5 | NA |
Itasca, Illinois, USA | _____________________ | |
March, 2000 | Anthony Storrie |
|
3