IMPORTANT SAFEGUARDS
PARTS OF THE SHREDDER
• | NEVER insert hands or fingers into paper entry as serious personal | ||
| injury may result. | ||
• THIS MACHINE IS NOT A TOY. Keep children and pets away from | |||
| shredder AT ALL TIMES as serious injury may result. Always unplug | ||
| shredder when not in use. | ||
• | Keep loose objects (jewelry, ties, long hair) away from shredder. | ||
| These items and others like them may cause serious injury if they | ||
| accidentally fall into the paper entry. | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
• | Confetti cut shredders contain sharp edges on the underside of the | ||
| machine. Use caution when positioning the shredder head onto the | ||
| basket. | ||
• | Do not exceed recommended sheet capacity or usage. |
C
B
A
A.Basket
B.Cabinet
C.Paper entry
D.Shredder head
D
E
F
G
E.Power switch
F.LEDs (red and green)
G.Viewer
• | Do not shred plastic (except credit cards), continuous forms, adhe- |
| sive labels, transparencies, newsprint, or cardboard. |
• This personal shredder is intended for paper only. Do not attempt to | |
| shred large paper clips or other hard materials (except staples and small |
| paper clips). |
• | Use only the power supply recommended on the product label. |
• Do not place shredder near or over a heat source or water. | |
• | Always turn off and unplug unit before moving or cleaning and |
| when not in use. |
• Do not insert aerosol cleaners into or around the shredder. Some | |
| agents may combust, causing serious injury. |
• | Never use flammable synthetic oil, petroleum- based or aerosol |
| lubricants to oil the cutting blades. Some agents may combust, |
| causing serious injury. Use only a recommended oil in a non- |
| aerosol container. See "MAINTENANCE." |
• | Do not use this product if it or the cord has been damaged in any |
| way. |
• | Do not open the cover for any reason. Doing so can expose you to |
| dangerous voltages and will void your warranty. |
Power Cord Care
•Place power cord in an easily accessible position, because it is the main disconnect switch.
•Do not place machine where adults, children or animals may walk on the cord.
•Do not rest anything on the power cord.
•If an extension cord is used, be sure that all products plugged into the extension cord do not exceed the extension cord ampere rat- ing.
ASSEMBLY
NOTE: This shredder will operate only when used with the supplied basket. The supplied basket has a
To assemble shredder:
Confetti cut shredders contain sharp edges on the underside of the shredder head. Use caution when positioning the shredder head onto the basket.
1.Position shredder head over cabinet. Place shredder head into top of cabinet as shown in Figure 1.
2.Firmly push down on four corners of shredder head to "lock" shredder head into position.
3.Push basket into shredder cabinet as shown in Figure 1. Push basket front in firmly so edges of basket/cabinet are aligned properly.
NOTE: To disassemble, pull out basket, place foot on bottom of cabinet, and firmly pull up on shredder head.
1 |
2 |