Fellowes 460Ms manual Basic Shredding Operation, Advanced Product Features, Product Maintenance

Page 3

BASIC SHREDDING OPERATION

Continuous operation: Up to 8-minutes maximum

NOTE: Shredder runs briefly after each pass to clear entry. Continuous operation beyond 8-minutes will trigger

20-minute cool down period.

PAPER OR CD/CARD

1

Plug in and turn ON (I)

2

3

 

or

Feed paper straight into

Hold CD/card at edge,

paper entry and release

feed right side of entry

 

and release

4

When finished shredding set to OFF (O)

ADVANCED PRODUCT FEATURES

Patented SafeSense® Technology Stops shredding immediately when hands touch the paper opening.

SilentShredTechnology SilentShred™ noise quality shreds without noisy disruptions.

SAFESENSE® TECHNOLOGY

Stops shredding immediately when hands touch the paper opening.

SET-UP AND TESTING

 

 

1

2

3

Turn the shredder ON

Touch test area and

SafeSense® is active and

(I) to activate SafeSense®

look for the SafeSense®

working properly

 

indicator to illuminate

 

For more information about all of Fellowes Advanced Product Features go to www.fellowes.com

PRODUCT MAINTENANCE

OILING SHREDDER

All micro-cut shredders require oil for peak performance. If not oiled, a machine may experience diminished sheet capacity, intrusive noise when shredding, and could ultimately stop running. To avoid these problems, we recommend you oil your shredder each time you empty your waste bin.

CLEANING AUTO-START INFRARED SENSORS

Paper detection sensors are designed for maintenance free operation. However, on rare occasions the sensors may become blocked by paper dust causing the motor to run even if there is no paper present.

(Note: two paper detection sensors are located in the center of the paper entry).

FOLLOW OILING PROCEDURE BELOW AND REPEAT TWICE

12

*Apply oil across entry Press and hold forward () 2-3 seconds

*Only use a non-aerosol vegetable oil in long nozzle container such as Fellowes 35250

TO CLEAN THE SENSORS

1

Turn OFF (O) and unplug shredder

23 4

Locate Auto-start

Dip cotton swab in

Using cotton swab, wipe

infared sensor

rubbing alcohol

away any contamination

 

 

from the paper sensors

Go to Support Section at www.fellowes.com or see back page of manual for useful telephone numbers.

TROUBLESHOOTING

Overheat Indicator: When the Overheat Indicator is illuminated, the shredder has exceeded its maximum operating temperature and needs to cool down. This indicator will remain illuminated and the shredder will not. operate for the duration of the recovery time. See Basic Shredding Operation for more information about the continuous operation and recovery time for this shredder.

SafeSense® Indicator: If hands are too close to the paper entry, the SafeSense® indicator will illuminate and the shredder will stop shredding.

Image 3
Contents Powershred 460Ms Do not place near or over heat source or water KEYCapabilities Will shred Paper, credit cards, CD/DVDs and staplesBasic Shredding Operation Advanced Product FeaturesProduct Maintenance TroubleshootingLimited Product Warranty

460Ms specifications

The Fellowes 460Ms is a top-of-the-line micro-cut shredder designed to provide users with enhanced security and efficiency. This advanced device is perfect for both home and office settings, delivering unparalleled protection for sensitive documents and personal information.

One of the standout features of the Fellowes 460Ms is its micro-cut technology. Unlike traditional strip-cut or cross-cut shredders, the 460Ms shreds paper into tiny particles that are virtually impossible to reconstruct. This makes it an ideal choice for individuals and businesses looking to safeguard confidential information from identity theft and corporate espionage. With a security level of P-5, users can feel confident that their important documents are irretrievably destroyed.

Another significant characteristic of the Fellowes 460Ms is its smart sensing technology. This feature detects overloads and ensures that the shredder operates within safe limits. Additionally, the machine automatically shuts off when it is overloaded, preventing potential jams and prolonging the product's lifespan.

Equipped with a powerful motor, the 460Ms can shred up to 10 sheets of paper in a single pass, achieving a speed of up to 12 feet per minute. It also effortlessly handles staples and credit cards, offering versatile functionality for various shredding needs. The waste bin can hold up to 6 gallons of shredded material, which means less frequent emptying and more productivity during busy work periods.

Accessibility is another priority for Fellowes, and the 460Ms features a unique 360-degree swivel design that allows for convenient placement in any workspace. The shredding operation is also ultra-quiet, boasting noise levels below 60 dB, which makes it suitable for quiet environments.

For further convenience, Fellowes ensures that the 460Ms stall functions only when the shredding process is complete, preventing accidents. The device has a compact design that combines aesthetic appeal with practicality, making it a great addition to any office or home setting.

Overall, the Fellowes 460Ms is an exceptional choice for those seeking a reliable, secure, and efficient micro-cut shredder. With its advanced features and thoughtful design, it addresses the needs of both personal and professional users, ensuring peace of mind when it comes to protecting sensitive information.