Fellowes C-325CI, C-325I manual JAM Proof System Operation, Straight Feed Sleep Mode

JAM PROOF SYSTEM OPERATION*

Eliminates frustrating jams by preventing overloads and powering through misfed paper.

1 Advanced Jam Prevention- Electronically		2
	measures paper thickness to prevent paper jams:
	Up to RED: Too many	Remove several sheets until
	sheets have been inserted.	indicator is below red.

Up to YELLOW: Productivity is optimized.

Up to GREEN: More sheets can be added.

If a misfeed	All indicators light up and	Wait for flashing to stop after automatic correction
occurs:	shredder pauses for 3-6 seconds	is complete. Regular shredding will resume.

3

Continue 100% Jam

Proof Shredding

If illuminates after paper has been reversed, press reverse and remove paper. Otherwise, regular shredding will resume.

*100% Jam Proof when used in accordance with user manual

STRAIGHT FEED

SLEEP MODE

WHEN IN SLEEP MODE

If Straight Feed indicator illuminates, remove paper and feed straight into shredder.

SAFESENSE® TECHNOLOGY OPERATION

SET-UP AND TESTING

1 2 3

In sleep mode	To get out of sleep mode or insert paper
	touch control panel

1 2 3 4

Turn the shredder ON	Touch test area and	SafeSense® is active and	If hand is held on SafeSense®
( ) to activate SafeSense®	look for the SafeSense®	working properly	area more than 2 seconds
	indicator to illuminate		Shredder will shut off

BASIC PRODUCT MAINTENANCE AND TROUBLESHOOTING

OILING SHREDDER

All cross-cut shredders require oil for peak performance. If not oiled, a machine may experience diminished sheet capacity, intrusive noise when shredding and could ultimately stop running. To avoid these problems, we recommend you oil your shredder each time you empty your waste bin.

FOLLOW OILING PROCEDURE BELOW AND REPEAT TWICE

123

*Apply oil across entry Shred one sheet Press and hold forward

() 2-3 seconds

*Only use a non-aerosol vegetable oil in long nozzle container such as Fellowes 35250

PREVENTIVE MAINTENANCE AND MISCELLANEOUS TROUBLESHOOTING

•Self Cleaning Cycle: Shredder periodically cycles in forward and reverse lasting 3-6 seconds (C-325Ci).

•Empty wastebasket when bin full indicator lights up.

•Shredder won’t run if the door is open, or bin needs to be emptied.

•Maintenance is an important part of protecting your investment. Don’t forget our oil (35250) and shredder bags (36056).

Go to Support Section at www.fellowes.com or see back page of manual for useful telephone numbers.

2