Fellowes c120ci warranty Key, Basic Shredding Operation, Capabilities, Sleep Mode

A.

B.

C.

D.

I.

G. K.

ENGLISH

Model C-120i/C-120Ci

KEY

A. SafeSense® Technology	F. Basket (CD)	K. Control Panel and LEDs
B. Paper entry	G. See safety instructions		1.		Reverse				6.	Remove paper
C. CD entry	H. Casters (2)			2.	ON/OFF		7.			Overheat
D. Door	I. Disconnect power switch	3.			Forward			8.		Sheet capacity indicator
E. Basket (paper)	J. Shipping bolts (wing nuts)	4.			Bin full	9.				SafeSense® indicator (yellow)
	To be removed prior to operation	5.			Door open				10. Auto button

BASIC SHREDDING OPERATION

PAPER/CARD OR CD
	1	2	3	4	5
		AUTO
Continuous operation:	Plug in and put	Press ( ) ON to	Feed paper/card	To shred CDs rotate	Hold CD at edge,
45 minutes maximum	disconnect power	activate	straight into paper	CD flap into place	feed into CD
NOTE: Continuous operation	switch in ON (I)		entry and release		entry and release
beyond 45 minutes will trigger	position

45 minute cool down period.

www.fellowes.com features an extensive on-line support section with a number of self-service options

6		77
AUTO
When finished		Do nothing and
shredding set	or	shredder will go
to OFF ( )		automatically to
		sleep mode

H.

JAM PROOF SYSTEM OPERATION*

Eliminates frustrating jams by preventing overloads and powering through misfed paper.

CAPABILITIES

1	Advanced Jam Prevention- Electronically	2
	measures paper thickness to prevent paper jams:

3

Will shred: Paper, credit cards, CD/DVD’s, staples and small paper clips

Will not shred: Adhesive labels, continuous form paper, transparencies, newspaper, cardboard, large paper clips, laminates, file folders, X-rays or plastic other than noted above

Paper shred size:
Cross-Cut	5/32 inches x 1-1/2 inches (3.9mm x 38mm)
Strip Cut	7/32 inches (5.8mm)

Maximum:
Sheets per pass	18*
CDs/Cards per pass	1*
Paper entry width	9 inches (230mm)

*8.5 inches x11 inches, 20lb., (75g) paper at 120V, 60 Hz, C-120i 6 Amps, C-120Ci 8 Amps; heavier paper, humidity or other than rated voltage may reduce capacity. Recommended daily usage rates: 100-150 paper passes; 100 cards; 10 CDs

Fellowes SafeSense® shredders are designed to be operated in office environments ranging between 50 – 80 degrees Fahrenheit (10 – 26 degrees Celsius) and 40 – 80% relative humidity.

Up to RED: Too Many	Remove several sheets until
sheets have been inserted.	indicator is below red.

Up to YELLOW: Productivity is optimized.

Continue 100% Jam

Proof Shredding

Advanced product features

Jam Proof System	Patented SafeSense® Technology	Sleep Mode
Eliminates frustrating jams	Stops shredder immediately	Energy saving feature shuts down
by preventing overloads and	when hands are too close to	automatically after 2 minutes of
powering through misfed paper	the paper entry	no shredding activity

Up to GREEN: More sheets can be added.

If a misfeed	All indicators light up and	Wait for flashing to stop after automatic correction
occurs:	shredder pauses for 3-6 seconds	is complete. Regular shredding will resume.

If illuminates after paper has been reversed, press reverse and remove paper. Otherwise, regular shredding will resume.

IMPORTANT SAFETY INSTRUCTIONS — Read Before Using!

*100% Jam Proof when used in accordance with user manual

•Keep away from children and pets. Keep hands away from paper entry. Always set to off or unplug when not in use.

• Keep foreign objects – gloves, jewelry, clothing, hair, etc. – away from shredder openings. If object enters top opening, switch to Reverse () to back out object.

• Never use aerosol products, petroleum based lubricants or other flammable products on or near shredder. Do not use canned air on shredder.

•	Do not use if damaged or defective. Do not disassemble shredder. Do
	not place near or over heat source or water.
•	This shredder has a Disconnect Power Switch (I) that must be in the ON

•Avoid touching exposed cutting blades under shredder head.

•Keep finger away from CD hole when shredding.

•Do not put foreign objects in paper entry.

•The grounded socket-outlet shall be installed near the equipment and shall be easily accessible.

•WARNING: Shredder Stability - Secure Shredder to wall with hardware provided following the instructions under Installation Instructions.

•Product is intended for commercial use only, and not for use around children.

SLEEP MODE

WHEN IN SLEEP MODE

1

In sleep mode

23

AUTO
To get out of sleep mode	or	insert paper
touch control panel

SAFESENSE® TECHNOLOGY OPERATION

SET-UP AND TESTING
1	2	3
AUTO
Turn the shredder ON	Touch test area and	SafeSense® is active and
( ) to activate SafeSense®	look for the SafeSense®	working properly
	indicator to illuminate

(I) position to operate shredder. In case of emergency, move switch to

OFF (O) position. This action will stop shredder immediately.

INSTALLATION INSTRUCTIONS

PREVENTIVE MAINTENANCE AND MISCELLANEOUS TROUBLESHOOTING

•	For peak performance, we recommend oiling shredder each time waste bin is emptied. Only use a non-aerosol vegetable oil.
	Machines not oiled may lose sheet capacity, become noisy, and ultimately, stop running.
•	Though paper detection sensors are designed to be maintenance free, the sensors occasionally become blocked by paper dust, causing the motor to run even

1. Place shredder against the wall (drywall, wooden, or concrete). Mark screw locations on wall through back of cabinet.

2. Drill 1/4" hole in wall for the anchor plugs.

3. Insert white plastic anchor plugs into drilled holes.

4. Insert (2) screws through back of cabinet and thread black rubber spacer onto the screw.

5. From inside cabinet use Phillips screw driver to secure shredder to the wall.

2

	if there is no paper present. Both sensors are located in the center of the paper entry.
•	Self Cleaning Cycle: Shredder periodically cycles in forward and reverse lasting 3-6 seconds.
•	Empty wastebasket when bin full indicator lights up.
•	Shredder won’t run if the door is open, or bin needs to be emptied.
• Maintenance is an important part of protecting your investment. Don’t forget our oil (35250) and shredder bags (36054).
• When shredding for a prolonged period of time, the motor can become warm and require a cool down period. When this occurs the overheat indicator will alert you to the
	problem, this model will require 45 minutes to cool down.

Go to Support Section at www.fellowes.com or see back page of manual for useful telephone numbers. 3