JAM PROOF SYSTEM OPERATION*
Eliminates frustrating jams by preventing overloads and powering through misfed paper.
AUTO
1Advanced Jam Prevention- Electronically measures paper thickness to prevent paper jams:
Up to RED: Too Many sheets have been inserted.
Up to YELLOW: Productivity is optimized.
Up to GREEN: More sheets can be added.
If a misfeed | All indicators light up and |
occurs: | shredder pauses for 3 seconds |
2
Remove several sheets until indicator is below red.
Wait for flashing to stop after automatic correction is complete. Regular shredding will resume.
3
Continue 100% Jam
Proof Shredding
If 
illuminates after paper has been reversed, press reverse and remove paper. Otherwise, regular shredding will resume.
*100% Jam Proof when used in accordance with user manual
SAFESENSE® TECHNOLOGY OPERATION
| 1 | 2 | 3 |
|
| MS- | MS- |
|
| 460C | 460C |
Turn the shredder ON | Touch test area and | SafeSense® is active and | |
( | ) to activate SafeSense® | look for the SafeSense® | working properly |
|
| indicator to illuminate |
|
oiling shredder
FOLLOW OILING PROCEDURE BELOW AND REPEAT TWICE |
| |
1 | 2 | 53 |
| MS- |
|
| 460C |
|
*Apply oil across | Shred one sheet | Press and hold forward | ||
entry and press |
| ( | ) | |
forward ( | ) |
|
|
|
PREVENTIVE MAINTENANCE AND MISCELLANEOUS TROUBLESHOOTING
•*For peak performance, we recommend oiling microshred shredders each time the waste bin is emptied. Only use a
•Though paper detection sensors are designed to be maintenance free, the sensors occasionally become blocked by paper dust, causing the motor to run even if there is no paper present. (Both paper detection sensors are located in the center of the paper entry).
•Once a day run shredder in reverse for 15 seconds to clear cutters.
•Empty wastebasket when bin full indicator lights up (bag # 36052).
•Shredder won’t run if the waste bin is not pushed all the way in, or bin needs to be emptied.
•When shredding for a prolonged period of time, the motor can become warm and require a cool down period. When this occurs, the overheat indicator will alert you to the problem, this model will require 25 minutes to cool down.
Go to Support Section at www.fellowes.com or see back page of manual for useful telephone numbers.
3