Fellowes DS-1 manual English, Operation, Troubleshooting, Capabilities, Warranty

Page 2

ENGLISH

Model DS-1

OPERATION

PAPER

Safe Sense™ touch guard area/sensor (orange)

Shredder head

Paper entry

Mesh basket

Reverse polarity switch

Step

Overheated (red)

Standby (green)

Control switch

Auto-On ( )

Off

Reverse (R)

Magnetic safety interlock

Continuous operation:

 

5-minute maximum

Set to Off

NOTE: Shredder runs briefly

 

after each pass to clear entry.

 

Continuous operation beyond

 

4-5-minutes will trigger

 

20-minute cool down period.

 

 

 

Press Auto-On ( )

Feed into paper entry

 

and release

CARD

Press Auto-On ( )

Hold credit card

Feed into center of entry

 

at edge

and release

Set to Off

Lift and remove basket

Safe Sense™ touch guard sensor will stop shredder when touched by adult or child.

SET UP — To Test Safe Sense™ Touch Guard Sensor Follow Instructions Below

Shredder comes fully assembled. Remove basket packing material and plug in.

Press Auto-On ( )

Touch test area

Sensor lights up

If sensor does

Slide switch

Plug in, replace basket

Sensor lights up

 

 

 

not light

 

 

 

 

 

 

Unplug and

 

Repeat touch test

 

 

 

 

remove basket

 

 

 

TROUBLESHOOTING

Paper jam: Set to Off and empty basket. Replace basket and follow any or all of the below procedures.

Press and hold

Alternate slowly back and forth

Set to Off

Pull uncut paper from

Press and hold

Shredder doesn’t start:

Make sure shredder is plugged in

Make sure control switch is in Auto-On () position

Clear paper particles covering magnetic safety interlock

CAPABILITIES

Will shred: Paper, small paper clips, credit cards and staples

Maximum:

Reverse (R)

paper entry

Reverse (R)

Wait 20 minutes for red light to turn off

Will not shred: Continuous forms, adhesive labels, transparencies, newspaper, cardboard, large paper clips, laminates or plastic other than noted above

Paper shred size:

 

Confetti-Cut

5/32” x 1-3/8” (3.9 x 35mm)

Sheets per pass (Confetti-Cut)

............................................................. 11*

Cards per pass

1

Passes per day

10-20

Paper width

9”/229mm

Continuous operation

4-5 minutes

*20 lb., 8.5”x11” paper at 120v, 60 Hz, 4.5Amps; heavier paper, humidity or other than rated voltage may reduce capacity.

MAINTENANCE

Run regularly in reverse for one minute

Lubricate when bin is full, or immediately, if:

Follow oiling procedure below and repeat twice.

IMPORTANT SAFETY INSTRUCTIONS — Read Before Using!

Keep away from children and pets. Always unplug when

Never use aerosol, petroleum-based or other flammable

 

not in use.

 

products on or near shredder. Do not use canned air on

Keep foreign objects – gloves, jewelry, clothing, hair,

 

shredder.

 

etc.– away from shredder openings. If object enters top

Do not use if damaged or defective. Do not open shredder

Capacity decreases

Motor sounds different, or shredder stops running

WARRANTY

Set to Off

*Apply oil

Press Auto-On ( )

Shred one sheet

Press and hold

 

across entry

 

 

Reverse (R)

 

 

 

 

2-3 seconds

*Only use a non-aerosol vegetable oil in long nozzle container such as Fellowes 35250

opening, press and hold Reverse (R) to back out object.

 

head. Do not place near or over heat or water source.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Avoid touching exposed blades under Confetti-Cut shredder head.

• The socket-outlet shall be installed near the equipment and shall be

 

 

 

easily accessible.

LIMITED WARRANTY Fellowes, Inc. (“Fellowes”) warrants the cutting blades of the machine to be free from defects in material and workmanship for 5 years from the date of purchase by the original consumer. Fellowes warrants all other parts of the machine to be free of defects in material and workmanship for 1 year from the date of purchase by the original consumer. If any part is found to be defective during the warranty period, your sole and exclusive remedy will be repair or replacement, at Fellowes’ option and expense, of the defective part.

This warranty does not apply in cases of abuse, mishandling, or unauthorized repair. ANY IMPLIED WARRANTY, INCLUDING THAT OF MERCHANTABILITY OR

FITNESS FOR A PARTICULAR PURPOSE, IS HEREBY LIMITED IN DURATION TO THE APPROPRIATE WARRANTY PERIOD SET FORTH ABOVE. In no event shall Fellowes be liable for any consequential or incidental damages attributable to this product.

This warranty gives you specific legal rights. The duration, terms, and conditions of this warranty are valid worldwide, except where different limitations, restrictions, or conditions may be required by local law.

For more details or to obtain service under this warranty, please contact us or your dealer.

2

3

Image 2
Contents Help Line English TroubleshootingWarranty Operation
Related manuals
Manual 40 pages 12.49 Kb Manual 8 pages 1.71 Kb

DS-1 specifications

The Fellowes DS-1 is a highly efficient and compact shredder designed for personal use or small office environments. This machine offers an array of features and modern technologies that enhance its functionality and user experience.

One of the standout features of the Fellowes DS-1 is its ability to shred multiple types of materials beyond just paper. It can handle credit cards, staples, and paper clips, making it a versatile choice for anyone looking to securely dispose of various materials. Its shredding capability is rated at 6 sheets of paper in a single pass, allowing users to quickly and efficiently get rid of sensitive documents in a matter of seconds.

The DS-1 is built with safety in mind. It incorporates a safety lock that prevents unauthorized use, ensuring that only designated users can operate the machine. This feature is particularly beneficial in shared environments where document security is paramount. Additionally, the DS-1 is equipped with a quiet motor that minimizes noise during operation, making it suitable for office settings where maintaining a peaceful atmosphere is essential.

In terms of technology, the Fellowes DS-1 utilizes a cross-cut shredding mechanism. This type of shredding converts documents into small, unreadable pieces, providing a high level of security against identity theft and data breaches. The cross-cut design not only enhances security, but it also reduces the volume of shredded material, allowing for easy disposal and a tidy workspace.

To support heavy usage, the DS-1 features an ample wastebasket that holds a significant amount of shredded paper, minimizing the frequency of emptying. The pull-out bin design makes it convenient to dispose of waste without causing a mess.

Overall, the Fellowes DS-1 is a well-rounded shredder that combines functionality, safety, and user-friendly features. Its compact size makes it ideal for home offices or small workspaces, while the advanced cross-cut technology ensures that confidential documents are disposed of securely. The Fellowes DS-1 stands as a reliable solution for anyone looking to protect their personal or organizational information. With its array of features, this shredder is poised to meet the demands of modern document security needs.