Fellowes MS-450Cs manual Operation, Troubleshooting, Maintenance, Warranty

Page 2

ENGLISH

Model MS-450C

OPERATION

Disconnect power switch must be in ON (I) position to operate shredder. Insert waste bag (Fellowes #36052) for easy disposal.

Shredder head

Sheet capacity icon

Paper entry

Indicator lights Ready (green)

Overheated

Window

Pull-out bin

SafeSense® Technology Card/CD entry See safety instructions below

SafeSense® (yellow)

SafeSense® override switch

Active

Not Active

Disconnect power switch

Continuous operation:

8-10-minute maximum

NOTE: Shredder runs briefly after each pass to clear entry. Continuous operation beyond

8-10-minutes will trigger a cool down period to resume operation.

PAPER

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Press Auto-On (I)

 

Feed into paper entry

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

and release

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Set to Off (O)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Set to Off (O)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CARD/CD

 

 

 

 

and plug in

 

 

 

 

 

 

 

 

 

 

 

 

Hold card/CD at edge

 

 

 

 

and unplug

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Feed into card/CD entry

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Press Auto-On (I)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

and release

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Control switch

Auto (I) Off (O)

TROUBLESHOOTING

Paper jam: Set to Off and empty bin. Replace bin and follow any or all of the below procedures.

Shredder doesn’t start:

 

Yellow - SafeSense® active

Yellow flashing - SafeSense® not active

Breakthrough Safety Technology! SafeSense® stops shredding when hands are too close to the opening.

— To Test SafeSense® Technology

Press Auto-On (I)

Touch test area

Sensor lights up

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Make sure bin is pushed in

Press and hold

Alternate slowly back and forth

Set to Off (O)

Gently pull uncut paper

Press and hold

 

Wait for motor to cool down

Reverse (

)

 

and unplug

from paper entry. Plug in.

Reverse (

)

 

 

 

 

ATTENTION: If the SafeSense® light remains on, you must engage the Override Switch in order to perform steps above. Once the jam is cleared, reset the SafeSense® feature. (See SafeSense® instructions below.)

Sensor light illuminated–paper jammed

CAPABILITIES

Will shred: Paper, credit cards, CD/DVDs and staples

Will not shred: Continuous forms, adhesive labels, transparencies, newspaper, cardboard, paper clips,* laminates or plastic other than noted above

Maximum:

 

Sheets per pass (Confetti-Cut)

7*

Cards/CDs per pass

1

Paper width

8.75”/220mm

SafeSense® paper jam: If the SafeSense® feature activates (SafeSense® light remains on) to cause the user to think the shredder has jammed when it has not, use the Override Switch to deactivate the SafeSense® feature and clear the paper. Warning – when switch is in override position, the SafeSense® light will flash and the SafeSense® feature will NOT function. Once the paper is cleared, reset the SafeSense® feature.

SafeSense® override switch

Paper shred size:

 

Confetti-Cut

5/64” x 5/16” (2 x 8mm)

Card/CD shred size:

 

Strip-Cut

5/16” (8mm)

*Paper clip shredding is not recommended for this shredder.

Card/CD width

5”/125mm

Continuous operation

8-10 minutes

*20lb., 8.5”x11” (75g) paper at 120v, 60 Hz, MS-450Cs–4.5Amps; heavier paper, humidity or other than rated voltage may reduce capacity. Recommended daily usage rates: 25-50 paper passes; 25 cards; 5 CDs.

Fellowes SafeSense® shredders are designed to be operated in home and office environments ranging between 50 – 80 degrees Fahrenheit (10 – 26 degrees Celsius) and 40 – 80% relative humidity.

MAINTENANCE

Run regularly in reverse for one minute

Oil when bin is full, or

Active

Not active

Follow oiling procedure below and repeat twice.

IMPORTANT SAFETY INSTRUCTIONS — Read Before Using!

Keep away from children and pets. Keep hands away from

 

Never use aerosol, petroleum based or other flammable products on or

 

 

paper entry. Always unplug when not in use.

 

 

near shredder. Do not use canned air on shredder.

Keep foreign objects – gloves, jewelry, clothing, hair, etc.

 

Do not use if damaged or defective. Do not open shredder head. Do not

 

– away from shredder openings. If object enters top opening,

 

 

place near or over heat or water source.

immediately, if:

Capacity decreases

Motor sounds different, or Shredder stops running

WARRANTY

*Apply oil

Press forward

Shred one sheet

Press and hold Reverse ( )

across entry

 

 

2-3 seconds

*Only use a non-aerosol vegetable oil in long nozzle container such as Fellowes 35250/3505006

 

 

switch to Reverse (

) to back out object.

 

• 7 sheets per pass to avoid jams.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Avoid touching exposed blades under Confetti-Cut shredder head.

The grounded socket-outlet shall be installed near the equipment and shall be

Use only designated entry for cards/CDs. Keep finger away from CD hole.

 

easily accessible.

Paper and Card/CD cannot be shredded at same time.

2

 

 

 

 

 

 

 

 

LIMITED WARRANTY Fellowes, Inc. (“Fellowes”) warrants the cutting blades of the machine to be free from

WARRANTY,

INCLUDING THAT OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE,

defects in material and workmanship for 5 years from the date of purchase by the original consumer.

IS

HEREBY

LIMITED IN DURATION TO THE APPROPRIATE WARRANTY PERIOD SET FORTH ABOVE.

Fellowes warrants all other parts of the machine to be free of defects in material and workmanship for 1

In

no event

shall Fellowes be liable for any consequential or incidental damages attributable to

year from the date of purchase by the original consumer. If any part is found to be defective during the

this product.

 

warranty period, your sole and exclusive remedy will be repair or replacement, at Fellowes’ option and

This warranty gives you specific legal rights. The duration, terms, and conditions of this warranty are valid

expense, of the defective part.

worldwide, except where different limitations, restrictions, or conditions may be required by local law.

This warranty does not apply in cases of abuse, mishandling, or unauthorized repair. ANY IMPLIED

For more details or to obtain service under this warranty, please contact us or your dealer.

3

Image 2
Contents MSMS--450Cs450Cs Warranty TroubleshootingMaintenance Operation